Pressure Measuring Instruments

Grid View:
Quickview

[Dekyung Tech] Paper specimen cutting machine_ for accreditation tests, link rush compression, specimen cutting_ Made in KOREA

(0)

 [Dekyung Tech] Paper specimen cutting machineQuote Contact_ cs@roasexpo.comSpecimen maker V capable of cutting specimens for tensile testing and link rush compression..

Quickview

[Daekyung Tech] Specimen cutting machine_ sample production, cutter option, pneumatic use_ Made in KOREA

(0)

 [Daekyung Tech] Specimen cutting machineQuote Contact_ cs@roasexpo.comPaper and rubber samples are produced using pneumatic pressure.This is a molding machine that cuts thin samples such as rubber, plastic, paper,and corrugated cardboard in accordance with ASTM, KS, and ISO standards.It uses pneumatics and does not require a separate power s..

Quickview

[Daekyung Tech] Notching molding machine_ small processing machine, V-notch production, plastic impact specimen_ Made in KOREA

(0)

[Daekyung Tech] Notching molding machineQuote Contact_ cs@roasexpo.comA compact machine capable of making V-notches for plastic impact specimens.V NOTCH CUTTER : Ø75mmSPEED : (40 ~ 80) rpmSAMPLE : PLASTIC IMPACT SAMPLEMOVING : X-Y TABLEPOWER : 220V, 1PH, 1kW..

Quickview

[Daekyung Tech] Low speed precision cutting machine_ diamond wheel, low speed cutting, small specimen cutting_ Made in KOREA

(0)

[Daekyung Tech] Low speed precision cutting machineQuote Contact_ cs@roasexpo.comIt is cut at low speed with a diamond wheel so that small specimens can be cut precisely.CAPACITY : (25 X 25) mm, Ø30 mmSPEED : (30 ~ 500) prmWHEEL : DIAMOND WHEELWHEEL DAI : Ø(75 ~ 125) mmLUBRICATION : SELF WETCUTTING : USING DEAD WEIGHTTYPE : MANUALPOWER :..

Quickview

[Daekyung Tech] High-speed precision cutting machine_ Medium-sized specimen, diamond-on-wheel, high-speed automatic cutting_ Made in KOREA

(0)

[Daekyung Tech] High-speed precision cutting machineQuote Contact_ cs@roasexpo.comHigh-speed automatic cutting with a diamond wheel so that medium-sized specimens can be cut precisely.CAPACITY : (60 X 60) mm , Ø 60 mmSPEED : (300 ~ 4,000) rpmWHEEL : DIAMOND WHEELWHEEL DAI : Ø(75 ~ 200) mmLUBRICATLON : PUMPINGCUTTING : MOTOREZEDTYP : AUTOMATIC..

Quickview

[Daekyung Tech] Medium-to-large high-speed cutting machine_Medium-sized specimen cutting, automatic cutting production, manual handle movable production_ Made in KOREA

(0)

[Daekyung Tech] Medium-to-large high-speed cutting machineQuote Contact_ cs@roasexpo.comIt is manufactured to cut medium-sized specimens precisely and automatically.Cutting size: 160 X 145 or Ø 154Speed ​​(RPM): 1000 ~ 4000 rpmWheel size: Ø 400 mmAuto/Manual : Orderer's specificationIt can be produced with automatic table movement or manual handle..

Quickview

[Daekyung Tech] Medium-sized high-speed cutting machine_ Easy cutting, high-speed cutting, medium-sized commercial cutting_ Made in KOREA

(0)

[Daekyung Tech] Medium-sized high-speed cutting machineQuote Contact_ cs@roasexpo.comIt cuts at high speed for quick and simple cutting of medium-sized commercial plates.Sample size: 85 X 85 mm or Ø 95 mmWheel Speed: 300~3600 RPMWheel size: Ø 250 ~ 305 mmSince the lower part is made of a single cast, there is no case of leakage of lubricant and no..

Quickview

[Daekyung Tech] Mounting press_ uniform sample production, double coil, extension of cylinder cap handle_ Made in KOREA

(0)

[Daekyung Tech] Mounting pressQuote Contact_ cs@roasexpo.comThis is a newly built DTM-1 mounting press.The temperature difference between the upper and lower parts of the cylinder has been reduced by doubling the heating coil that applies heat.The result is clean, uniform samples.The handle of the cylinder cap has been greatly expanded and designe..

Quickview

[Daekyung Tech] Metal specimen model cutting machine_ metal cutting, diameter 24mm, various metals available_ Made in KOREA

(0)

[Daekyung Tech] Metal specimen model cutting machineQuote Contact_ cs@roasexpo.comThis cutter can cut various metals up to 24mm in diameter.SPIRAL CUTTER : Ø24mmSPEED : (100 ~ 1,800) rpmSAMPLE : AL, STEELJIG : 1 SETPOWER 220V, 1PH, 1kW..

Quickview

[Daekyung Tech] Specimen press_ sample inflow, rubber/plastic sample, various standard sample production_ Made in KOREA

(0)

[Daekyung Tech] Specimen pressQuote Contact_ cs@roasexpo.comWe manufacture rubber and plastic samples of various sizes using inflow.CAPACITY : (100, 200, 300, 500) kNTYPE : HYDRAULIC CYLINDERTEMP : RT, 350 ℃MOLD : ORDER MADEPOWER : 220V, 3PH, (2 ~5) kW..

Quickview

[Daekyung Tech] Tire Cutter _ Vehicle tires, cut as intended, customized _ Made in KOREA

(0)

[Daekyung Tech] Tire CutterQuote Contact_ cs@roasexpo.comThis equipment cuts vehicle tires according to the user's intention.CAPACITY : Ø 510mm X 4.5 tSPEED : 1,700 rpmCONTROL : MANUALLOADING : MOTOR, 3 HpSAMPLE : TIRE..

Showing 1 to 11 of 11 (1 Pages)