[YEONJIN S-TECH]180° Peel Strength Meter(180° Peel-off strength tester),  UTA™-500N Adhesion testing equipment

This product is an instrument capable of testing peel strength such as 180° Peel-off, 90° Peel-off, and T-peel, and is a physical property analysis instrument manufactured and sold by our company. The peel-off test fixture can be replaced and operated according to the purpose of the peel test. Low and high temperature plates or thermal chambers are available as options to enable peel tests according to temperature conditions.

This product is an instrument capable of testing peel strength such as 180° Peel-off, 90° Peel-off, and T-peel, and is a physical property analysis instrument manufactured and sold by our company. The peel-off test fixture can be replaced and operated according to the purpose of the peel test. Low and high temperature plates or thermal chambers are available as options to enable peel tests according to temperature conditions.

In addition,
it is a useful device for high-speed peeling tests because it is possible to test at a speed of at least 0.01 mm/sec and at a maximum of 40 mm/sec (2400 m/sec).
The operating program used to drive the device has various measurement modes, so it can be applied to most physical properties analysis, and software upgrades are provided free of charge for more than 10 years.

The basic travel range is 500 mm, but it can be changed to 2-3 times more travel range at very low cost for very large samples or high-speed peel tests.

The system consists of the UTA main body, the latest indicator, load cell, UTA dedicated software, workstation or PC.

         Dimension                                            Printed data

Classic 90° Peel-off wired fixture

Peel-off testing equipment (UTA™ Peel-off testing equipment)

This product is an instrument capable of testing peel strength such as 180° Peel-off, 90° Peel-off, and T-peel, and is a physical property analysis instrument manufactured and sold by our company. The peel-off test fixture can be replaced and operated according to the purpose of the peel test. Low and high temperature plates or thermal chambers are available as options to enable peel tests according to temperature conditions.
This product is an instrument capable of testing peel strength such as 180° Peel-off, 90° Peel-off, and T-peel, and is a physical property analysis instrument manufactured and sold by our company. The peel-off test fixture can be replaced and operated according to the purpose of the peel test. Low and high temperature plates or thermal chambers are available as options to enable peel tests according to temperature conditions.

In addition,

it is a useful device for high-speed peeling tests because it is possible to test at a speed of at least 0.01 mm/sec and at a maximum of 40 mm/sec (2400 m/sec).

The operating program used to drive the device has various measurement modes, so it can be applied to most physical properties analysis, and software upgrades are provided free of charge for more than 10 years.

The basic travel range is 500 mm, but it can be changed to 2-3 times more travel range at very low cost for very large samples or high-speed peel tests.

The system consists of the UTA main body, the latest indicator, load cell, UTA dedicated software, workstation or PC.

Quote Inquiry - ca@roaexpo.com

There are no reviews for this product.