Shopping Cart

My cart

0 item(s) - USD $0.00

  • Your shopping cart is empty!
Power Drills

Category Features

Power Drills

Grid View:
YG-1 CARMIDE ENDMILLS, 4F-X-POWER S 4F-1*6*2.5*50MM(SEM811010) 4F-25*25*50*120MM(SEM811250) 1EA
-13%
Quickview

YG-1 CARMIDE ENDMILLS, 4F-X-POWER S 4F-1*6*2.5*50MM(SEM811010) 4F-25*25*50*120MM(SEM811250) 1EA

Ship from South Korea
(0)
USD $18.26 USD $21.00

-This 4-flute ball end mill can be applied to various cutting areas such as materials below HRc50, pre-hardened steel, alloy steel, carbon steel, heat-resistant alloy steel, copper, reinforced plastic, etc.-This 4-flute ball end mill has excellent wear resistance without micro-chipping...

YG-1 CARMIDE LONG ENDMILLS, 2F-X-POWER S 2F-1*6*8*60MM(SEM81601008) 2F-20*20*50*110MM(SEM81620050) 1EA
--4%
Quickview

YG-1 CARMIDE LONG ENDMILLS, 2F-X-POWER S 2F-1*6*8*60MM(SEM81601008) 2F-20*20*50*110MM(SEM81620050) 1EA

Ship from South Korea
(0)
USD $21.74 USD $21.00

-This 2-flute ball end mill can be applied to various cutting areas such as materials below HRc50, pre-hardened steel, alloy steel, carbon steel, heat-resistant alloy steel, copper, reinforced plastic, etc.-This 2-flute ball end mill has excellent wear resistance without micro-chipping...

YG-1 CARMIDE LONG ENDMILLS, 4F-X-POWER S 4F-2*6*8*60MM(SEM81702008) 4F-25*25*70*130MM(SEM81725070) 1EA
-13%
Quickview

YG-1 CARMIDE LONG ENDMILLS, 4F-X-POWER S 4F-2*6*8*60MM(SEM81702008) 4F-25*25*70*130MM(SEM81725070) 1EA

Ship from South Korea
(0)
USD $22.61 USD $26.00

-This 4-flute ball end mill can be applied to various cutting areas such as materials below HRc50, pre-hardened steel, alloy steel, carbon steel, heat-resistant alloy steel, copper, reinforced plastic, etc.-This 4-flute ball end mill has excellent wear resistance without micro-chipping...

YG-1 CARMIDE ROUGHING ENDMILLS, X-POWER S 3*6*8*50MM(SEM814030) 25*25*38*100MM(SEM81425038) 1EA
-13%
Quickview

YG-1 CARMIDE ROUGHING ENDMILLS, X-POWER S 3*6*8*50MM(SEM814030) 25*25*38*100MM(SEM81425038) 1EA

Ship from South Korea
(0)
USD $28.70 USD $33.00

-High-Performance Rapping End Mill: This rapping end mill demonstrates excellent performance in powerful medium cutting of special steel and alloy steel such as high hardness steel, SUS series, Inconel, Ti, Ni, Cr, Mo, etc.-Versatile Rapping End Mill: This rapping end mill can be applied from high hardness steel to carbon steel, making it versatile..

YG-1 CARMIDE BALL ENDMILLS, 2F-X-POWER S 1*4*2.5*50MM(SEM8130104S) 25*25*50*180MM(SEM813250) 1EA
--16%
Quickview

YG-1 CARMIDE BALL ENDMILLS, 2F-X-POWER S 1*4*2.5*50MM(SEM8130104S) 25*25*50*180MM(SEM813250) 1EA

Ship from South Korea
(0)
USD $24.35 USD $21.00

-Ultra-hard Ball End Mill - XPowerS: This product, boasting a luxurious design and excellent performance, handles even the most difficult tasks with ease.-High-strength Material: The ultra-hard ball end mill is made of high-strength material, offering excellent durability and stable performance over a long period...

YG-1 COMBO-HOMO SPIRAL FLUTED TAP 1-0.25 (T1809011) 22-1.0 (T1809772) 1EA
-13%
Quickview

YG-1 COMBO-HOMO SPIRAL FLUTED TAP 1-0.25 (T1809011) 22-1.0 (T1809772) 1EA

Ship from South Korea
(0)
USD $10.70 USD $12.30

-Spiral Tap: Suitable for machining blocked holes, and ideal for carbon steel and alloy steel where chips occur continuously.-Easy Chip Discharge: The discharge of cutting chips is easy, and since it is used in machines, the spiral tap is also referred to as a machine tap...

YG-1 COMBO-HOMO GUN POINTED TAP 2-0.4 (T1829132) 22-1.5 (T1829764) 1EA
-13%
Quickview

YG-1 COMBO-HOMO GUN POINTED TAP 2-0.4 (T1829132) 22-1.5 (T1829764) 1EA

Ship from South Korea
(0)
USD $9.57 USD $11.00

-Spiral Tap: Suitable for machining blocked holes, and ideal for carbon steel and alloy steel where chips occur continuously.-Easy Chip Discharge: The discharge of cutting chips is easy, and since it is used in machines, the spiral tap is also referred to as a machine tap...

YG-1 HAND TAP 2-0.4-40L (T7099139) 22-2.5-115L (T7099749) (3EA 1SET)
-13%
Quickview

YG-1 HAND TAP 2-0.4-40L (T7099139) 22-2.5-115L (T7099749) (3EA 1SET)

Ship from South Korea
(0)
USD $22.00 USD $25.30

-Spiral Tap: Suitable for machining blocked holes, and ideal for carbon steel and alloy steel where chips occur continuously.-Easy Chip Discharge: The discharge of cutting chips is easy, and since it is used in machines, the spiral tap is also referred to as a machine tap...

YG-1 SPIRAL TAP-MULTI-1 HOMO 3-0.5 (TQ371202) 20-1.5 (TQ371724) 1EA
-13%
Quickview

YG-1 SPIRAL TAP-MULTI-1 HOMO 3-0.5 (TQ371202) 20-1.5 (TQ371724) 1EA

Ship from South Korea
(0)
USD $6.43 USD $7.40

-High-Quality Material: It is made from high-speed steel powder (HSS-PM), ensuring durability and long-lasting performance.-Versatile Use: This tool is suitable for a wide range of materials, including soft to hard materials.-Special Design: The unique spiral design of the tap helps prevent abnormal feed of the tap, preventing thread enlargement...

YG-1 SPIRAL TAP-MULTI-1 NON-COATED 4-0.7 (TR371243K) 20-2.5 (TR371704K) 1EA
-13%
Quickview

YG-1 SPIRAL TAP-MULTI-1 NON-COATED 4-0.7 (TR371243K) 20-2.5 (TR371704K) 1EA

Ship from South Korea
(0)
USD $5.83 USD $6.70

-High-Quality Material: It is made from high-speed steel powder (HSS-PM), ensuring durability and long-lasting performance.-Versatile Use: This tool is suitable for a wide range of materials, including soft to hard materials.-Special Design: The unique spiral design of the tap helps prevent abnormal feed of the tap, preventing thread enlargement...

YG-1 TIN COATED SPIRAL FLUTED TAP 5-0.8 TIN (T3809282K) 20-2.5 TIN (T3809703) 1EA
-13%
Quickview

YG-1 TIN COATED SPIRAL FLUTED TAP 5-0.8 TIN (T3809282K) 20-2.5 TIN (T3809703) 1EA

Ship from South Korea
(0)
USD $6.87 USD $7.90

-High-Quality Material: It is made from high-speed steel powder (HSS-PM), ensuring durability and long-lasting performance.-Versatile Use: This tool is suitable for a wide range of materials, including soft to hard materials.-Special Design: The unique spiral design of the tap helps prevent abnormal feed of the tap, preventing thread enlargement...

YG-1 SPIRAL FLUTED TAP-PRIME 2-0.4 (TRD03131) 20-2.5 (TRD03703) 1EA
-13%
Quickview

YG-1 SPIRAL FLUTED TAP-PRIME 2-0.4 (TRD03131) 20-2.5 (TRD03703) 1EA

Ship from South Korea
(0)
USD $10.09 USD $11.60

-Suitable for Blocked Hole Machining: The Spiral Tap is suitable for carbon steel and alloy steel where chips occur continuously.-Easy Chip Discharge: The Spiral Tap allows for easy chip discharge and is also referred to as a Machine Tap because it is used in machines...

YG-1 PRIME SPIRAL TAP FOR DIFFICULT-TO-CUT MATERIAL 4-0.7 (TRD41243) 36-4.0 (TRD41B35) 1EA
-13%
Quickview

YG-1 PRIME SPIRAL TAP FOR DIFFICULT-TO-CUT MATERIAL 4-0.7 (TRD41243) 36-4.0 (TRD41B35) 1EA

Ship from South Korea
(0)
USD $6.00 USD $6.90

-Suitable for Blocked Hole Machining: The Spiral Tap is suitable for carbon steel and alloy steel where chips occur continuously.-Easy Chip Discharge: The Spiral Tap allows for easy chip discharge and is also referred to as a Machine Tap because it is used in machines...

YG-1 LONG SHANK SPIRAL FLUTED TAP HOMO 120L 3-0.5-120L (T1827202) 16-1.5-120L (T1827612) 1EA
-13%
Quickview

YG-1 LONG SHANK SPIRAL FLUTED TAP HOMO 120L 3-0.5-120L (T1827202) 16-1.5-120L (T1827612) 1EA

Ship from South Korea
(0)
USD $19.83 USD $22.80

-High-Quality Material: The Long Shank Spiral Fluted Tap is made from high-speed steel, ensuring durability and long-lasting performance.-Versatile Use: This tool is suitable for a wide range of materials, including difficult-to-cut materials such as high carbon steel, alloy steel, forged steel, and tool steel...

LONG SHANK SPIRAL FLUTED TAP HOMO 100L 3-0.5-100L (T1817202) 14-2.0-100L (T1817542) 1EA
-13%
Quickview

LONG SHANK SPIRAL FLUTED TAP HOMO 100L 3-0.5-100L (T1817202) 14-2.0-100L (T1817542) 1EA

Ship from South Korea
(0)
USD $15.04 USD $17.30

-High-Quality Material: The Long Shank Spiral Fluted Tap is made from high-speed steel, ensuring durability and long-lasting performance.-Versatile Use: This tool is suitable for a wide range of materials, including difficult-to-cut materials such as high carbon steel, alloy steel, forged steel, and tool steel...

YG-1 LONG SHANK SPIRAL FLUTED TAP HOMO 200L 6-1.0-200L (T1847312) 24-3.0-200L (T1847783) 1EA
-13%
Quickview

YG-1 LONG SHANK SPIRAL FLUTED TAP HOMO 200L 6-1.0-200L (T1847312) 24-3.0-200L (T1847783) 1EA

Ship from South Korea
(0)
USD $24.00 USD $27.60

-High-Quality Material: The Long Shank Spiral Fluted Tap is made from high-speed steel, ensuring durability and long-lasting performance.-Versatile Use: This tool is suitable for a wide range of materials, including difficult-to-cut materials such as high carbon steel, alloy steel, forged steel, and tool steel...

YG-1 SPIRAL FLUTED TAP FOR STAINESS STEEL 2.0-0.4 (T1880131) 20-2.5 (T1880703) 1EA
-13%
Quickview

YG-1 SPIRAL FLUTED TAP FOR STAINESS STEEL 2.0-0.4 (T1880131) 20-2.5 (T1880703) 1EA

Ship from South Korea
(0)
USD $10.61 USD $12.20

-Combo SUS Spiral Tap Homo: The Combo SUS Spiral Tap Homo is a specialized tool from Y.G-1, optimized for machining stainless steel and other work hardening materials.-Blocked Hole Machining: The Spiral Tap is suitable for blocked hole machining, where chips occur continuously...

YG-1 SPIRAL FLUTED TAP FOR NON-FERROUS METAL 2-0.4 (T2911131) 10-1.5 (T2911423K) 1EA
-13%
Quickview

YG-1 SPIRAL FLUTED TAP FOR NON-FERROUS METAL 2-0.4 (T2911131) 10-1.5 (T2911423K) 1EA

Ship from South Korea
(0)
USD $11.04 USD $12.70

-Superior Performance: The YG-1 Spiral Fluted Tap is designed for non-ferrous metals, providing exceptional performance and durability.-Blocked Hole Machining: The Spiral Tap is suitable for blocked hole machining, where chips occur continuously...

YG-1 CARBIDE TAP 3-0.5-46L 3.0P (T0441203) 12-1.75-82L 3.0P (T0441505) 1EA
-13%
Quickview

YG-1 CARBIDE TAP 3-0.5-46L 3.0P (T0441203) 12-1.75-82L 3.0P (T0441505) 1EA

Ship from South Korea
(0)
USD $47.57 USD $54.70

-Superior Performance: The YG-1 Spiral Fluted Tap is designed for non-ferrous metals, providing exceptional performance and durability.-Blocked Hole Machining: The Spiral Tap is suitable for blocked hole machining, where chips occur continuously...

YG-1 CARBIDE TAP 3-0.5-46L 2.5P (T0102203) 12-1.75-82L 2.5P (T0102504) 1EA
-13%
Quickview

YG-1 CARBIDE TAP 3-0.5-46L 2.5P (T0102203) 12-1.75-82L 2.5P (T0102504) 1EA

Ship from South Korea
(0)
USD $57.13 USD $65.70

-Superior Performance: The YG-1 Spiral Fluted Tap is designed for non-ferrous metals, providing exceptional performance and durability.-Blocked Hole Machining: The Spiral Tap is suitable for blocked hole machining, where chips occur continuously...

YG-1 SCREW THREAD INSERT HAND TAP 3-0.5-48L (T2399207K) 16-1.5-95L (T2399617) 1EA
-13%
Quickview

YG-1 SCREW THREAD INSERT HAND TAP 3-0.5-48L (T2399207K) 16-1.5-95L (T2399617) 1EA

Ship from South Korea
(0)
USD $6.70 USD $7.70

-Specialized Function: The It is a functional tap designed specifically for mounting insert coils. It has different specifications from regular taps.-Precision Tapping: This tap is designed for precision tapping, ensuring clean and accurate threads every time...

YG-1 SCREW THREAD INSERT SPIRAL FLUTED TAP 3-0.5-48L (T2197201) 20-2.5-120L (T2197701) 1EA
-13%
Quickview

YG-1 SCREW THREAD INSERT SPIRAL FLUTED TAP 3-0.5-48L (T2197201) 20-2.5-120L (T2197701) 1EA

Ship from South Korea
(0)
USD $9.39 USD $10.80

-Specialized Function: The It is a functional tap designed specifically for mounting insert coils. It has different specifications from regular taps.-Precision Tapping: This tap is designed for precision tapping, ensuring clean and accurate threads every time...

YG-1 PIPE TAP PF1/8-28-55L (T2562202) PF1-11-95L (T2562782) 1EA
-13%
Quickview

YG-1 PIPE TAP PF1/8-28-55L (T2562202) PF1-11-95L (T2562782) 1EA

Ship from South Korea
(0)
USD $10.87 USD $12.50

-Specialized Function: The YG-1 Pipe Tap is a tool designed specifically for machining female threads in pipes and other similar applications.-Precision Tapping: These taps are designed for precision tapping, ensuring clean and accurate threads every time...

YG-1 PIPE TAP PT1/8-28-55L (TRL01202) PT1-11-95L (TRL01782) 1EA
-13%
Quickview

YG-1 PIPE TAP PT1/8-28-55L (TRL01202) PT1-11-95L (TRL01782) 1EA

Ship from South Korea
(0)
USD $13.13 USD $15.10

-Specialized Function: The YG-1 Pipe Tap is a tool designed specifically for machining female threads in pipes and other similar applications.-Precision Tapping: These taps are designed for precision tapping, ensuring clean and accurate threads every time...

YG-1 PIPE TAP PS1/8-28-55L (T2552202) PS1-11-95L (T2552782) 1EA
-13%
Quickview

YG-1 PIPE TAP PS1/8-28-55L (T2552202) PS1-11-95L (T2552782) 1EA

Ship from South Korea
(0)
USD $10.87 USD $12.50

-Specialized Function: The YG-1 Pipe Tap is a tool designed specifically for machining female threads in pipes and other similar applications.-Precision Tapping: These taps are designed for precision tapping, ensuring clean and accurate threads every time...

Showing 51 to 75 of 114 (5 Pages)