CTNG Light transmission type soot meter CTN-2200 full set accessories wired remote control, printer, standard filter, RPM meter_Made in KOREA

0 reviews 0 sold. Only 9999 remain

USD $3,391.30 USD $4,260.87 -20%

Negotiable (specific conditions to required)

Brands ctng

Product Code: CTN-2200

Stock In Stock

Viewed 1879 times

Ship from South Korea

Quantity:

Add to wishlist
Add to compare

Tags: Diesel vehicle soot meter light transmission type CTN-2200 CTN diesel light transmission type soot meter soot concentration measurement exhaust gas permeability engine soot inspection soot measurement equipment diesel automobile heated diesel light transmission type soot degree measurement of engine exhaust gas particle concentration measurement three-stage impactor for soot measurement heated probe no-load acceleration test soot probe exhaust gas concentration absorbance

House Brand available (OEM, ODM, OBM)

Dropshipping available

Seller information

주식회사 씨티앤지

South Korea

Premium Partner

Seller Rating: 0 Reviews

Contact Seller

Visit Seller's Store

Categories Cart Account Search Recent View Go to Top

Description
Reviews (0)

Product Description

Diesel vehicle smoke meter: This device measures the soot concentration of diesel (diesel) engines, and uses a partial flow sampling method light transmission method.
CTN-2200: This is the product model name of CTN, which enables continuous measurement in real time and helps to measure the concentration of soot in automobiles.
Smoke meter full set accessories: Wired remote control, printer, standard filter, RPM meter, etc. are included to enhance the convenience of users.

Light-transmitting soot meter for diesel vehicles

Full set of products
Soot meter + wired remote control + printer + standard filter + RPM meter

It is a device that measures the concentration of soot generated from diesel (diesel) engines by the partial flow collection method light transmission method, and it is a device that can be continuously measured in real time and helps to measure the concentration of soot in automobiles.

Light-transmitting measurement method of partial flow sampling method

4-digit license plate number printable

Automatic adjustment of LED light value (soot value accurate)

Dual-fan ON/OFF function (ON only when used)

Fast response times and accurate measurements

Easy operation principle makes it easy for anyone to use

Full set accessories

Wired remote control connection enables remote control operation

The result can be printed by mounting the printer

Vehicle RPM and OIL temperature can be measured

Standard Filters

Wired remote control

printer

Standard Filters

RPM Meter

National Institute of Environmental Sciences : Type Approval No. OED 2023-7
KC Certification Registration No. R-R-CtA-CTN-2200

Individual purchase

Customers can purchase the soot meter or accessories individually rather than as a full set.
If you click on the name of the product you want, you can go to the detailed page of the product. You can check the price, specifications, features, and usage of the product, and you can add it to your cart or order it right away.

Wired remote control printer Standard Filters RPM Meter

B2B Corporate Member

As a corporate member, if you would like to purchase a smoke meter or accessories, please contact us by email. We will be happy to advise you quickly and kindly.
You can do this by emailing cs@roaexpo.com clicking on Contact Us.

Click Email Inquiry!

Product appearance

Front

Rear section

1 display control panel, 2 printers

3,5 intake fan, 4 moving handle, 6 extraction gas inlet

Side parts

1 RPM connection, 2 remote control connection, 3 oil temperature connection, 4 RS232 connection, 5 power switch, 6 fuse, 7 power cord connection

A full set of products

1 main unit

Basic accessories
1 probe, 1 probe hose, 1 power cord, 2 fuses, 1 user manual, 1 communication cable, 1 PC program

Full set accessories
1 print, 1 remote control, 1 standard filter, 1 RPM

Installing the product and operating the remote control

Insert the probe hose into the gas inlet on the back of the analyzer, check whether the tightening is correct, and connect the remote control, RPM / oil temperature, and PC communication cable according to the options.
And connect the power cable on the side, and then turn it on.
After warming up, insert the end of the measuring probe into the exhaust port to be measured and start the measurement.

The remote control plays the same role as the display part of the main unit and the function KEY.
Press the ON/OFF KEY on the remote control for 3 seconds.

Precautions

Safety precautions

This is to protect the safety of users and prevent unforeseen dangers or damages. Please be sure to read it carefully and use the product correctly

General Precautions

(1) Please read the instruction manual thoroughly and East Sea small operation of the measuring instrument.
(2) Please perform a brief inspection before measuring.
(3) Stop using it immediately if any unusual problem occurs, and contact the manufacturer for inspection.
(4) Please calibrate according to the calibration cycle.

Installation location and conditions

(1) Please install it in a place where there is no direct sunlight, rain or wind, or sudden changes in temperature.
(2) Install it in a place where it is not directly exposed to the exhaust gas of the car.
(3) Please install it away from devices with high voltage or high current.
(4) Please install it in a well-ventilated place.

Notes

(1) Some of the contents of the user manual may differ depending on the supply specifications.
(2) The pictures and descriptions used in the user manual may differ from the actual product.
(3) The contents of the user manual are subject to change without notice in order to improve quality.

Download the manual

Customers can download the product guide manual in English or Korean .
If you click the button in the desired language, the manual will be downloaded automatically.
For example, if you want to get the English manual, you can click the [English Manual] button. If you open the downloaded manual, you can find detailed information about the installation, use, maintenance and care of the product, safety matters, soot measurement principles, etc.

Product Manual English Product manuals English

Specifications

Item	Contents
Model/Product Name	CTN-2200 / Light-transmitting soot meter
Metrics	Soot concentration, light absorption coefficient, RPM(option), oil temperature °C(option)
Measurement method	Partial flow sampling method light transmission type
UseFielder	0.5 seconds Besel low pass digital filter
Light source/detector	Green LED (565nm) / Photodiode
Measuring range	Fumes	Optical absorption system	.RPM	Oil Temperature
Measuring range	0.0 ~ 100 %	0.00 ~ 21.42 m-1	0 ~ 8,000 rpm	0 ~ 120 ℃
Display part	4-digit 7-segments LED	4-digit 7-segments LED	4-digit 7-segments LED	4-digit 7-segments LED
Cell length/inner diameter	Length: 215mm / Inner Diameter: 21mm
Cell Temperature	Approx. 70 ~ 80°C constant temperature
Repeatability/Accuracy	Within 1% / Within ±1% (RPM: ±80rpm)
Response Time	0.5 seconds (90%)
Soot measurement speed	60 times per second
Soot concentration display	4 times per second
Data transmission (communication)	RS232C, 10 times per second
Warm-up time	Approx. 5 minutes
Operating Temperature	-10 ~ 40℃
Power Consumption/Power Consumption	AC 110V~220V, 50Hz~60Hz/About 65W
Size/Weight	425 (W) x 190 (D) x 385 (H) mm / approx. 5 kg (body)
Probe hose length	1.5m
Basic accessories	Probes and hoses, power cords, communication cables, PC programs, user manuals, fuses
Full set configuration	Smoke meter, printer, remote control, standard filter, RPM, oil temperature