Category Features

Other Test Instruments

Grid View:
Quickview

[Daekyung Tech] Tire Cutter _ Vehicle tires, cut as intended, customized _ Made in KOREA

Ship from South Korea
(0)

[Daekyung Tech] Tire CutterQuote Contact_ cs@roasexpo.comThis equipment cuts vehicle tires according to the user's intention.CAPACITY : Ø 510mm X 4.5 tSPEED : 1,700 rpmCONTROL : MANUALLOADING : MOTOR, 3 HpSAMPLE : TIRE..

Quickview

[Daekyung Tech] Specimen press_ sample inflow, rubber/plastic sample, various standard sample production_ Made in KOREA

Ship from South Korea
(0)

[Daekyung Tech] Specimen pressQuote Contact_ cs@roasexpo.comWe manufacture rubber and plastic samples of various sizes using inflow.CAPACITY : (100, 200, 300, 500) kNTYPE : HYDRAULIC CYLINDERTEMP : RT, 350 ℃MOLD : ORDER MADEPOWER : 220V, 3PH, (2 ~5) kW..

Quickview

[Daekyung Tech] Metal specimen model cutting machine_ metal cutting, diameter 24mm, various metals available_ Made in KOREA

Ship from South Korea
(0)

[Daekyung Tech] Metal specimen model cutting machineQuote Contact_ cs@roasexpo.comThis cutter can cut various metals up to 24mm in diameter.SPIRAL CUTTER : Ø24mmSPEED : (100 ~ 1,800) rpmSAMPLE : AL, STEELJIG : 1 SETPOWER 220V, 1PH, 1kW..

Quickview

[Daekyung Tech] Mounting press_ uniform sample production, double coil, extension of cylinder cap handle_ Made in KOREA

Ship from South Korea
(0)

[Daekyung Tech] Mounting pressQuote Contact_ cs@roasexpo.comThis is a newly built DTM-1 mounting press.The temperature difference between the upper and lower parts of the cylinder has been reduced by doubling the heating coil that applies heat.The result is clean, uniform samples.The handle of the cylinder cap has been greatly expanded and designe..

Quickview

[Daekyung Tech] Medium-sized high-speed cutting machine_ Easy cutting, high-speed cutting, medium-sized commercial cutting_ Made in KOREA

Ship from South Korea
(0)

[Daekyung Tech] Medium-sized high-speed cutting machineQuote Contact_ cs@roasexpo.comIt cuts at high speed for quick and simple cutting of medium-sized commercial plates.Sample size: 85 X 85 mm or Ø 95 mmWheel Speed: 300~3600 RPMWheel size: Ø 250 ~ 305 mmSince the lower part is made of a single cast, there is no case of leakage of lubricant and no..

Quickview

[Daekyung Tech] Medium-to-large high-speed cutting machine_Medium-sized specimen cutting, automatic cutting production, manual handle movable production_ Made in KOREA

Ship from South Korea
(0)

[Daekyung Tech] Medium-to-large high-speed cutting machineQuote Contact_ cs@roasexpo.comIt is manufactured to cut medium-sized specimens precisely and automatically.Cutting size: 160 X 145 or Ø 154Speed ​​(RPM): 1000 ~ 4000 rpmWheel size: Ø 400 mmAuto/Manual : Orderer's specificationIt can be produced with automatic table movement or manual handle..

Quickview

[Daekyung Tech] High-speed precision cutting machine_ Medium-sized specimen, diamond-on-wheel, high-speed automatic cutting_ Made in KOREA

Ship from South Korea
(0)

[Daekyung Tech] High-speed precision cutting machineQuote Contact_ cs@roasexpo.comHigh-speed automatic cutting with a diamond wheel so that medium-sized specimens can be cut precisely.CAPACITY : (60 X 60) mm , Ø 60 mmSPEED : (300 ~ 4,000) rpmWHEEL : DIAMOND WHEELWHEEL DAI : Ø(75 ~ 200) mmLUBRICATLON : PUMPINGCUTTING : MOTOREZEDTYP : AUTOMATIC..

Quickview

[Daekyung Tech] Low speed precision cutting machine_ diamond wheel, low speed cutting, small specimen cutting_ Made in KOREA

Ship from South Korea
(0)

[Daekyung Tech] Low speed precision cutting machineQuote Contact_ cs@roasexpo.comIt is cut at low speed with a diamond wheel so that small specimens can be cut precisely.CAPACITY : (25 X 25) mm, Ø30 mmSPEED : (30 ~ 500) prmWHEEL : DIAMOND WHEELWHEEL DAI : Ø(75 ~ 125) mmLUBRICATION : SELF WETCUTTING : USING DEAD WEIGHTTYPE : MANUALPOWER :..

Quickview

[Daekyung Tech] Notching molding machine_ small processing machine, V-notch production, plastic impact specimen_ Made in KOREA

Ship from South Korea
(0)

[Daekyung Tech] Notching molding machineQuote Contact_ cs@roasexpo.comA compact machine capable of making V-notches for plastic impact specimens.V NOTCH CUTTER : Ø75mmSPEED : (40 ~ 80) rpmSAMPLE : PLASTIC IMPACT SAMPLEMOVING : X-Y TABLEPOWER : 220V, 1PH, 1kW..

Quickview

[Daekyung Tech] Specimen cutting machine_ sample production, cutter option, pneumatic use_ Made in KOREA

Ship from South Korea
(0)

 [Daekyung Tech] Specimen cutting machineQuote Contact_ cs@roasexpo.comPaper and rubber samples are produced using pneumatic pressure.This is a molding machine that cuts thin samples such as rubber, plastic, paper,and corrugated cardboard in accordance with ASTM, KS, and ISO standards.It uses pneumatics and does not require a separate power s..

Quickview

[Dekyung Tech] Paper specimen cutting machine_ for accreditation tests, link rush compression, specimen cutting_ Made in KOREA

Ship from South Korea
(0)

 [Dekyung Tech] Paper specimen cutting machineQuote Contact_ cs@roasexpo.comSpecimen maker V capable of cutting specimens for tensile testing and link rush compression..

Quickview

[Daekyung Tech] Cord creep tester_ tire cord, belt type, creep test_ Made in KOREA

Ship from South Korea
(0)

[Daekyung Tech] Cord creep testerQuote Contact_cs@roasexpo.comIt is an equipment manufactured for the purpose of performing a creep test by inserting a tire cord in the form of a rubber and molded belt for a specified time with a constant load and temperature...

Quickview

[Daekyung Tech] Automatic tension EPI device_ tire cord, automatic method, constant tension_ Made in KOREA

Ship from South Korea
(0)

[Daekyung Tech] Automatic tension EPI deviceQuote Contact_cs@roasexpo.comThis equipment is designed to automatically wind the tire cord with a certain tension...

Quickview

[Daekyung Tech] Cord dryer_ Reinforcing material, tire cord, heat treatment/ chemical treatment_ Made in KOREA

Ship from South Korea
(0)

[Daekyung Tech] Cord dryerQuote Contact_cs@roasexpo.comIt is an equipment manufactured for the purpose of research/development by heat-treating and, chemically treating tire cords, which are reinforcement materials for automobile tires, before mass production.CAPACITY : 300N X 7 mACCURACY : WITHIN ± 0.5 %HEATING : (RT ~ 300) ℃SPEED : 3 m/..

Quickview

[Daekyung Tech] Screen door tester_ sample crack, failure test, pressure test_ Made in KOREA

Ship from South Korea
(0)

[Daekyung Tech] Screen door testerQuote Contact_cs@roasexpo.comIt is designed and manufactured as a device that tests whether a sample is cracked or broken by reproducing the pressure applied to the screen door,a safety facility at a railway station, under similar conditions.CAPACITY : 400mmAgDETECTOR : LOAD CELL, LVD SENSORLOADING : HYDRAULIC CYLI..

Quickview

[Daekyung Tech] Chair durability tester_ safety inspection, characteristic control, durability automatic control_ Made in KOREA

Ship from South Korea
(0)

[Daekyung Tech] Chair durability testerQuote Contact_cs@roasexpo.comFor the purpose of inspecting the safety of home chairs, the characteristics and, durability are automatically controlled to determine the product's deformation or pass/fail.CAPACITY : 1 kN, 2 kNDETECTOR : LOAD CELLLOADING : AIR SERVO CYLINDERMOVING : MOTORCONTROL : P.C CONTROLSAMP..

Quickview

[Daekyung Tech] Flexural Vibration Tester_ Easy to use, Pipe tester, Crack tester_ Made in KOREA

Ship from South Korea
(0)

[Daekyung Tech] Flexural Vibration TesterQuote Contact_cs@roasexpo.comBy giving bending and vibration due to fatigue of the plastic pipe material for sewage pipe,the product is judged pass/fail based on whether it is cracked or damaged. It is easy to use and has the advantage of high reproducibility.CAPACITY : 10 kNMODE : FORCE CYCLE, VIBRATION TES..

Quickview

[Daekyung Tech] Tire cord heat treatment tester_ Reinforcement, direct material research, program management control_ Made in KOREA

Ship from South Korea
(0)

[Daekyung Tech] Tire cord heat treatment testerQuote Contact_cs@roasexpo.comFiber cord is a direct material and reinforcement material due to technological advancement, and a large amount of it is used for hoses, belts, tires, and other elements. However, the requirements in the industrial field require the production of cords that can be used in a..

Quickview

[Daekyung Tech] Vibration (earthquake) tester_ Fatigue recovery, resistance, deformation characteristics judgment_ Made in KOREA

Ship from South Korea
(0)

[Daekyung Tech] Vibration (earthquake) testerQuote Contact_cs@roasexpo.comIt is manufactured for the purpose of judging, researching, and developing the resistance,fatigue recovery, and deformation characteristics of materials by applying pressure and seismic waves with hydraulic force to various materials.CAPACITY : VERTICAL COMPRESS 150 kN (15 TF..

Quickview

[Daekyung Tech] Academia tester (P.C control type)_ real-time graph output, designated control of academic authority rate, measurement of expansion power_ Made in KOREA

Ship from South Korea
(0)

 [Daekyung Tech] Academia tester (P.C control type)Quote Contact@CS@roasexpo.comIt is equipped with functions such as P.C control, real-time graph output type, specified control of expansion rate,and measurement of expansion force, out of the existing simple functions.*Supplied to: POSCO R&D Center..

Quickview

[Daekyung Tech] Tire cord bending tester_ flexural test, durability test, vehicle tire_ Made in KOREA

Ship from South Korea
(0)

[Daekyung Tech] Tire cord bending testerQuote Contact_CS@roasexpo.comIt is an equipment that tests the durability of the cord inserted into the tire through the bending test at high temperature.CAPACITY : 100 kgf X 3 AXLESLOADING : CAM & MOTORTEMPERATURE : (RT ~ 150) ℃ANGLE : (0 ~ 30) ℃CONTROL : SEMI-AUTODEAD WEIGHT : 100 kgfCAM ADJUST : M..

-20%
Quickview

CTNG Light transmission type soot meter CTN-2200 full set accessories wired remote control, printer, standard filter, RPM meter_Made in KOREA

Ship from South Korea
(0)
USD $3,391.30 USD $4,260.87

Diesel vehicle smoke meter: This device measures the soot concentration of diesel (diesel) engines, and uses a partial flow sampling method light transmission method.CTN-2200: This is the product model name of CTN, which enables continuous measurement in real time and helps to measure the concentration of soot in automobiles.Smoke meter full set ac..

-23%
Quickview

CTN Gas Light Transmissive Smoke Meter CTN-2200 Additional Accessories for Diesel Vehicle Single article wired remote control_Made in KOREA

Ship from South Korea
(0)
USD $260.87 USD $339.13

Diesel vehicle smoke meter: This device measures the soot concentration of diesel (diesel) engines, and uses a partial flow sampling method light transmission method.CTN-2200: This is the product model name of CTN, which enables continuous measurement in real time and helps to measure the concentration of soot in automobiles.Additional accessories ..

-23%
Quickview

CTNG Light transmission type soot meter CTN-2200 additional accessories for diesel vehicles Single article standard filter_Made in KOREA

Ship from South Korea
(0)
USD $260.87 USD $339.13

Diesel vehicle smoke meter: This device measures the soot concentration of diesel (diesel) engines, and uses a partial flow sampling method light transmission method.CTN-2200: This is the product model name of CTN, which enables continuous measurement in real time and helps to measure the concentration of soot in automobiles.Additional accessories ..

-23%
Quickview

CTN Gas Light Transmissive Smoke Meter CTN-2200 Additional Accessories for Diesel Vehicle Single Product RPM Meter_Made in KOREA

Ship from South Korea
(0)
USD $1,043.48 USD $1,356.52

Diesel vehicle smoke meter: This device measures the soot concentration of diesel (diesel) engines, and uses a partial flow sampling method light transmission method.CTN-2200: This is the product model name of CTN, which enables continuous measurement in real time and helps to measure the concentration of soot in automobiles.Additional accessories ..

Showing 1 to 25 of 113 (5 Pages)