Shopping Cart

My cart

0 item(s) - USD $0.00

  • Your shopping cart is empty!
Other Test Instruments

Category Features

Other Test Instruments

Grid View:
[Daekyung Tech] DuPont Impact Tester_Sample Inspection, Drop Height Manually, Paint, Film, and Painted Sample Use_ Made in KOREA
Quickview

[Daekyung Tech] DuPont Impact Tester_Sample Inspection, Drop Height Manually, Paint, Film, and Painted Sample Use_ Made in KOREA

Ship from South Korea
(0)
Call for Price

[Daekyung Tech] DuPont Impact TesterQuote inquiry_ CS@roasexpo.comThis is a small drop impact tester that tests samples by dropping weights of different weights.In general, samples with paints, films, and coatings applied to metal plates are used.The drop height can be manually set, and the maximum drop height is 500 mm...

[Daekyung Tech] Spring tester 30 kN_ spring constant tester, dedicated program provided, tensile/extrusion test possible_ Made inn KOREA
Quickview

[Daekyung Tech] Spring tester 30 kN_ spring constant tester, dedicated program provided, tensile/extrusion test possible_ Made inn KOREA

Ship from South Korea
(0)
Call for Price

[Daekyung Tech] Spring tester 30 kNQuote Contact_CS@roasexpo.comIt is a spring tester of up to 30 kN.It has a normal UTM frame, but it has been modified to fit the spring test.Due to the nature of the high-load spring, if a single load cell is used, it is easily damaged due to the influence of the eccentric load.Daekyung Tech's products are designe..

[Daekyung Tech] Spring tester 5kN_ spring constant K, touch screen, tensile, compression direction test_ Made inn KOREA
Quickview

[Daekyung Tech] Spring tester 5kN_ spring constant K, touch screen, tensile, compression direction test_ Made inn KOREA

Ship from South Korea
(0)
Call for Price

[Daekyung Tech] Spring tester 5kNQuote Contact_CS@roasexpo.comThis equipment is used to find the spring constant K of a general coil spring.It is designed to be tested in both tensile and compressive directions.You can run the test simply by using the touch screen.The free height of the spring can be measured automatically at the start of the test...

[Daekyung Tech] Coil spring tester_ Deflection angle measurement, spring test, railway coil spring test_ Made in KOREA
Quickview

[Daekyung Tech] Coil spring tester_ Deflection angle measurement, spring test, railway coil spring test_ Made in KOREA

Ship from South Korea
(0)
Call for Price

[Daekyung Tech] Coil spring testerQuote Contact_CS@roasexpo.comThis is a testing machine for testing the coil spring used in the high-speed train KTX.Since the springs used in railway use two springs overlapping each other, it is necessary to check the deflection angles of the inner and outer springs and combine them in opposite directions.Daekyung..

[Daekyung Tech] Ring crush compression tester_corrugated cardboard compressive strength test, industrial measuring instrument, deformation/displacement measurement_Made in KOREA
Quickview

[Daekyung Tech] Ring crush compression tester_corrugated cardboard compressive strength test, industrial measuring instrument, deformation/displacement measurement_Made in KOREA

Ship from South Korea
(0)
Call for Price

[Daekyung Tech] Ring crush compression testerQuote Contact_CS@roasexpo.comThis equipment tests the compressive strength of corrugated cardboard.The test is conducted under the conditions of RCT/ECT/FCT/FAT/CMT/CCT.The maximum load is 5,000 N and the test speed is up to 50 mm/min.Depending on the test method, various pressing jigs are used...

[Daekyung Tech] Box compression strength tester_ Compressive strength test for packaging containers, machine/jig production, various size tests available_Made in KOREA
Quickview

[Daekyung Tech] Box compression strength tester_ Compressive strength test for packaging containers, machine/jig production, various size tests available_Made in KOREA

Ship from South Korea
(0)
Call for Price

 [Daekyung Tech] Box compression strength testerQuote Contact_CS@roasexpo.comBox compressive strength testerThis is a testing machine that tests the compressive strength of boxes, pallets, and packaging containers.It is usually used to figure out how many layers can be stacked when stacking products.We manufacture machines and jigs in various ..

[Daekyung Tech] Earthquake generation tester_ material resistance, fatigue recovery, deformation characteristics judgment, research/development_ Made in KOREA
Quickview

[Daekyung Tech] Earthquake generation tester_ material resistance, fatigue recovery, deformation characteristics judgment, research/development_ Made in KOREA

Ship from South Korea
(0)
Call for Price

 [Daekyung Tech] Earthquake generation testerQuote Contact_CS@roasexpo.comIt is manufactured for the purpose of judging or researching and developing the resistance,fatigue recovery, and deformation characteristics of materials by applying pressure and seismic waves to various materials with hydraulic force...

[Daekyung Tech] Motor type bending Wdaring Tester_resistance, fatigue recovery, deformation characteristics determination, research/development purpose_ Made in KOREA
Quickview

[Daekyung Tech] Motor type bending Wdaring Tester_resistance, fatigue recovery, deformation characteristics determination, research/development purpose_ Made in KOREA

Ship from South Korea
(0)
Call for Price

[Daekyung Tech] Motor type bending Wdaring TesterQuote Contact_CS@roasexpo.comIt is manufactured for the purpose of researching and developing the resistance,fatigue recovery, and deformation characteristics of materials by applying fatigue to various materials with the power of the motor...

[Daekyung Tech] Car body buckling tester_ resistance, fatigue recovery, deformation characteristics determination, research/development purpose_ Made in KOREA
Quickview

[Daekyung Tech] Car body buckling tester_ resistance, fatigue recovery, deformation characteristics determination, research/development purpose_ Made in KOREA

Ship from South Korea
(0)
Call for Price

[Daekyung Tech] Car body buckling testerQuote Contact_CS@roasexpo.comIt is manufactured for the purpose of researching and developing the resistance,fatigue recovery, and deformation characteristics of materials by applying pressure and seismic waves with hydraulic force to various materials...

[Daekyung Tech] High-strength pipe bending fatigue tester_ resistance, fatigue recovery, determination of deformation characteristics, research/development purpose_ Made in KOREA
Quickview

[Daekyung Tech] High-strength pipe bending fatigue tester_ resistance, fatigue recovery, determination of deformation characteristics, research/development purpose_ Made in KOREA

Ship from South Korea
(0)
Call for Price

[Daekyung Tech] High-strength pipe bending fatigue testerQuote Contact_CS@roasexpo.comIt is manufactured for the purpose of researching and developing the resistance,fatigue recovery, and deformation characteristics of materials by applying pressure and seismic waves with hydraulic force to various materials...

[Daekyung Tech] 1/4 Car Hydrauilc Exciter_ static drag, fatigue recovery, determination of deformation characteristics, research/development purpose_ Made in KOREA
Quickview

[Daekyung Tech] 1/4 Car Hydrauilc Exciter_ static drag, fatigue recovery, determination of deformation characteristics, research/development purpose_ Made in KOREA

Ship from South Korea
(0)
Call for Price

[Daekyung Tech] 1/4 Car Hydrauilc ExciterQuote Contact_CS@roasexpo.comIt is manufactured for the purpose of research and development or to judge material resistance,fatigue recovery, and deformation characteristics by applying pressure and vibration wavelength to the 1/4 car with hydraulic power...

[Daekyung Tech] Horizontal tensile fatigue tester_resistance, fatigue recovery, determination of deformation characteristics, research/development purpose_ Made in KOREA
Quickview

[Daekyung Tech] Horizontal tensile fatigue tester_resistance, fatigue recovery, determination of deformation characteristics, research/development purpose_ Made in KOREA

Ship from South Korea
(0)
Call for Price

[Daekyung Tech] Horizontal tensile fatigue testerQuote Contact_CS@roasexpo.comIt is manufactured for the purpose of research and development or judging the resistance, fatigue recovery,and deformation characteristics of materials by applying hydraulic force to various materials...

[Daekyung Tech] 30MN bridge elastic bearing and LRB composite tester_LRB performance test, displacement control/load control fatigue test_ Made in KOREA
Quickview

[Daekyung Tech] 30MN bridge elastic bearing and LRB composite tester_LRB performance test, displacement control/load control fatigue test_ Made in KOREA

Ship from South Korea
(0)
Call for Price

[Daekyung Tech] 30MN bridge elastic bearing and LRB composite testerQuote Contact_CS@roasexpo.comIt is a composite structure tester that can test the performance of elastic bearings for bridges,vibration-proof rubber, and LRB for construction...

[Daekyung Tech] Vibration tester (hydraulic servo control type)_ resistance, fatigue recovery, determination of deformation characteristics, research/development purpose_ Made in KOREA
Quickview

[Daekyung Tech] Vibration tester (hydraulic servo control type)_ resistance, fatigue recovery, determination of deformation characteristics, research/development purpose_ Made in KOREA

Ship from South Korea
(0)
Call for Price

[Daekyung Tech] Vibration tester (hydraulic servo control type)Quote Contact_CS@roasexpo.comThe hydraulic exciter is an excitation for modal testing of parts and equipment,and it is a testing machine that can perform vibration fatigue of parts and equipment.Since high-frequency motion is required rather than low-frequency motion due to the characte..

[Daekyung Tech] Actuator for structural testing_ resistance, fatigue recovery, fatigue judgment, research/development purpose_ Made in KOREA
Quickview

[Daekyung Tech] Actuator for structural testing_ resistance, fatigue recovery, fatigue judgment, research/development purpose_ Made in KOREA

Ship from South Korea
(0)
Call for Price

 [Daekyung Tech] Actuator for structural testingQuote Contact_CS@roasexpo.comIt is manufactured for the purpose of judging or researching and developing material resistance,fatigue recovery, and fatigue failure by repeatedly pressing the structure with hydraulic force...

[Daekyung Tech] 3-axis fatigue tester_ Vibration assumption design, home appliance test, Hz setting possible_ Made in KOREA
Quickview

[Daekyung Tech] 3-axis fatigue tester_ Vibration assumption design, home appliance test, Hz setting possible_ Made in KOREA

Ship from South Korea
(0)
Call for Price

[Daekyung Tech] 3-axis fatigue testerQuote Contact_CS@roasexpo.comThis is a fatigue tester manufactured to the customer's specifications.This is a test to check if an abnormality occurs in the product by generating vibration in the X-Y-Z 3 axes.It is designed with the assumption of vibrations generated during transportation of home appliances such ..

[Daekyung Tech] Universal Formability Tester_ Formability Evaluation, Processability Evaluation, PC Control Type_Made in KOREA
Quickview

[Daekyung Tech] Universal Formability Tester_ Formability Evaluation, Processability Evaluation, PC Control Type_Made in KOREA

Ship from South Korea
(0)
Call for Price

[Daekyung Tech] Universal Formability TesterQuote Contact@CS@roasexpo.comIt is a method of evaluating the formability and workability of steel sheet materials,and it is designed and manufactured as a PC control type as an equipment to test the phenomenon of plastic deformation without judgment of the material.Product Name: Universal Formability Tes..

[Daekyung Tech] Pipe test machine_ Cracky application, expansion rate application, Ferrous/Non-metal tester_Made in KOREA
Quickview

[Daekyung Tech] Pipe test machine_ Cracky application, expansion rate application, Ferrous/Non-metal tester_Made in KOREA

Ship from South Korea
(0)
Call for Price

[Daekyung Tech] Pipe test machineQuote Contact@CS@roasexpo.comIt has been produced for the purpose of reaching the goal by applying the Cracky or Academic Ratio by dividing iron and non-metallic pipes into 8 equal parts...

[Daekyung Tech] Friction wear tester_ wear evaluation, sample characteristics analysis, research/development purpose_ Made in KOREA
Quickview

[Daekyung Tech] Friction wear tester_ wear evaluation, sample characteristics analysis, research/development purpose_ Made in KOREA

Ship from South Korea
(0)
Call for Price

[Daekyung Tech] Friction wear testerQuote Contact@CS@roasexpo.comIt is a tester that evaluates the abrasion of various materials such as metals and non-metals.Type: program control and measurement, friction coefficient, frictiondistance, friction time storage and outputMeasured friction force: 0 to 20 kgfPressing force: 1.5 Mpa (15.3 kgf)Rotation m..

[Daekyung Tech] Taber wear tester_ wear wheel evaluation, sample characteristics, research/development purpose_ Made in KOREA
Quickview

[Daekyung Tech] Taber wear tester_ wear wheel evaluation, sample characteristics, research/development purpose_ Made in KOREA

Ship from South Korea
(0)
Call for Price

[Daekyung Tech] Taber wear testerQuote Contact@CS@roasexpo.comIt is a testing machine that evaluates the abrasion of various materials such as leather, polymers, and non-metals with a wear wheel with a set standard...

[Daekyung Tech] Mobile phone wear tester_ life endurance test, life measurement, industrial too_ Made in KOREA
Quickview

[Daekyung Tech] Mobile phone wear tester_ life endurance test, life measurement, industrial too_ Made in KOREA

Ship from South Korea
(0)
Call for Price

[Daekyung Tech] Mobile phone wear testerQuote Contact@CS@roasexpo.comThis equipment is a device that measures the lifespan of the contact point when charging the cell phone battery through an endurance test...

[Daekyung Tech] Constant Speed ​​Friction Tester_Friction/Abrasion Number Data, Research and Quality Control_ Made in KOREA
Quickview

[Daekyung Tech] Constant Speed ​​Friction Tester_Friction/Abrasion Number Data, Research and Quality Control_ Made in KOREA

Ship from South Korea
(0)
Call for Price

[Daekyung Tech] Constant Speed ​​Friction TesterQuote Contact_CS@roasexpo.comThis equipment is manufactured for the purpose of research and quality control byapplying brake-pad to the surface of a metal rotating plate under constant load and temperature conditions to obtain data such as friction,abrasion, and number of frictions.BRAKE-PAD (automobi..

[Daekyung Tech] Friction fastness tester_Automotive interior material surface, building interior material resistance test, friction tester_ Made in KOREA
Quickview

[Daekyung Tech] Friction fastness tester_Automotive interior material surface, building interior material resistance test, friction tester_ Made in KOREA

Ship from South Korea
(0)
Call for Price

[Daekyung Tech] Friction fastness testerQuote Contact_CS@roasexpo.comThis tester is a device that tests the frictional resistance of the surface of a sample (vehicle interior materials, building interior materials, etc.)by rubbing it at the prescribed load and speed.Power: AC 220V, 60HzPower consumption: 0.2kWCounting device: 6 rows settingNumber o..

[Daekyung Tech] Hydraulic wear tester_ sample characteristics analysis, sample characteristics research, sample characteristics development_ Made in KOREA
Quickview

[Daekyung Tech] Hydraulic wear tester_ sample characteristics analysis, sample characteristics research, sample characteristics development_ Made in KOREA

Ship from South Korea
(0)
Call for Price

[Daekyung Tech] Hydraulic wear testerQuote Contact_CS@roasexpo.comIt is manufactured for the purpose of analyzing, researching,and developing the characteristics of the sample after the durability test is completed by applying torsion after applying a constant load to the thrust bearing.CAPACITY : TORQUE 3 kN.m / FORCE 100kNACCURACY : WITHIN ±1 %CO..

[Daekyung Tech] Stabilizer pushing force tester_ Stopper clamping force test, research/development before mass production_Made in KOREA
Quickview

[Daekyung Tech] Stabilizer pushing force tester_ Stopper clamping force test, research/development before mass production_Made in KOREA

Ship from South Korea
(0)
Call for Price

[Daekyung Tech] Stabilizer pushing force testerQuote Contact_CS@roasexpo.comThis equipment is manufactured for the purpose of testing and managing the stopper clamping force of the vehicle suspension device,the stabilizer, after mass production, or for research/development before mass production.CAPACITY: 20kNLOADING : SERVO MOTORMODE : CLAMPING FO..

Showing 76 to 100 of 113 (5 Pages)