Search

[Daekyung Tech] Drop impact testerQuote inquiry_ CS@roasexpo.comIt is a drop impact tester that can test the impact that may occur while moving the refrigerator and whether the product is damaged as a result.Manufactured to customer specifications.If you have an idea you want to test, Daekyung Tech Co., Ltd. can produce it...

[Daekyung Tech] DuPont Impact TesterQuote inquiry_ CS@roasexpo.comThis is a small drop impact tester that tests samples by dropping weights of different weights.In general, samples with paints, films, and coatings applied to metal plates are used.The drop height can be manually set, and the maximum drop height is 500 mm...

[Daekyung Tech] Charpy Impact Tester-SmallQuote inquiry_ CS@roasexpo.comASTM E23ASTM D256ISO 179It is a low-capacity Charpy impact tester.The weight is manually raised and the data is read directly from the dial gauge.specificationCapacity: 3J, 6J, 15JMaximum tensile angle: 120 degreesWeight of weight: 2.44 kgInternational Standard: ASTM E23, D256,..

[Daekyung Tech] Charpy Impact TesterQuote inquiry_ CS@roasexpo.comASTM E23ASTM A370ASTM D6110It is a Charpy impact tester that conforms toImpact testers for standard specimens are largely divided into Charpy and Izod methods.Whereas Charpy places the sample horizontally on the ground and tests, Izod installs the sample vertically.Since an important..

[Daekyung Tech] Coil spring testerQuote Contact_CS@roasexpo.comThis is a testing machine for testing the coil spring used in the high-speed train KTX.Since the springs used in railway use two springs overlapping each other, it is necessary to check the deflection angles of the inner and outer springs and combine them in opposite directions.Daekyung..

[Daekyung Tech] High-strength pipe bending fatigue testerQuote Contact_CS@roasexpo.comIt is manufactured for the purpose of researching and developing the resistance,fatigue recovery, and deformation characteristics of materials by applying pressure and seismic waves with hydraulic force to various materials...

[Daekyung Tech] Horizontal tensile fatigue testerQuote Contact_CS@roasexpo.comIt is manufactured for the purpose of research and development or judging the resistance, fatigue recovery,and deformation characteristics of materials by applying hydraulic force to various materials...

[Daekyung Tech] Friction wear testerQuote Contact@CS@roasexpo.comIt is a tester that evaluates the abrasion of various materials such as metals and non-metals.Type: program control and measurement, friction coefficient, frictiondistance, friction time storage and outputMeasured friction force: 0 to 20 kgfPressing force: 1.5 Mpa (15.3 kgf)Rotation m..

[Daekyung Tech] Constant Speed ​​Friction TesterQuote Contact_CS@roasexpo.comThis equipment is manufactured for the purpose of research and quality control byapplying brake-pad to the surface of a metal rotating plate under constant load and temperature conditions to obtain data such as friction,abrasion, and number of frictions.BRAKE-PAD (automobi..

[Daekyung Tech] Friction fastness testerQuote Contact_CS@roasexpo.comThis tester is a device that tests the frictional resistance of the surface of a sample (vehicle interior materials, building interior materials, etc.)by rubbing it at the prescribed load and speed.Power: AC 220V, 60HzPower consumption: 0.2kWCounting device: 6 rows settingNumber o..

[Daekyung Tech] Clutch Cover Characteristics TesterQuote Contact_ CS@roasexpo.comThis is a dedicated testing machine for clutch cover characteristics for automobiles.Delivered to SECO.It is a device that obtains results by measuring the operation area and characteristics by applying a load to the release lever and clutch disk.CAPACITY : CLAMPING LO..

[Daekyung Tech] Clutch release lever durability testerQuote Contact_cs@roasexpo.comIt is a device that obtains results by measuring the operation and characteristics of the release lever by repeating the durability test.It is for clutch tester of large vehicles.It was delivered to the research institute attached to the automobile.CAPACITY : (0 ~ 15..

[Daekyung Tech] Handle wear testerQuote Contact@CS@roasexpo.comIt is manufactured according to the MS 625-04 standard and is suitable for the abrasion test of leather handles.The cloth is sprayed with a liquid with a composition similar to human sweat and subjected to a specific load and repeated test.The durability of the handle material is tested..

[Daekyung Tech] Hose Clamp TesterQuote Contact@CS@roasexpo.comThis equipment tests the strength of hose clamps for vehicles.Measure the force by pulling the hose clamp in three directions, equally spaced at 120 degrees.It is a device for measuring the clamping force of "SUS wire clamp" for automobile hoses,and it is a device to measure the force us..

[Daekyung Tech] Hot torsion testing machineQuote Contact_ cs@roasexpo.comIt is manufactured for the purpose of researching and developing the deformation and, characteristics of materials by rapidly heating various round and wire rods to high temperature and rotating them at high speed.CAPACITY : 200 kN.mACCURACY : WITHIN ± 1%TABLE : X AXIS SL..

[Daekyung Tech] Clutch disc torsion characteristic testerQuote Contact@CS@roasexpo.com[Summary] This is a precision equipment for total inspection to obtain the torsional torque and angle of the clutch disk for automobiles. It is driven by AC Servo Motor, and all control is done by computer, and it is a device that analyzes data by program.Tourque:..

[Daekyung Tech] DryerQuote Contact_ cs@roasexpo.comIt is designed and manufactured for the purpose of testing the shrinkage and aging state of specimens by heating rubber, plastic,and electric wires at high temperature.TEMP : (RT ~ 250) ℃INNER SIZE : (500 X 500 X 500) mmINNER MATERIAL : STS 304OUTER MATERIAL : SS41 COATINGCONTROL : P.I.K CONTR..

[Daekyung Tech] Flame retardant tester (horizontal type)Quote inquiry_ CS@roasexpo.comThis tester is designed and manufactured in accordance with KS and UL standards for the purpose of inspecting the flame retardancy and, combustibility of specimens by controlling and applying the prescribed flame to specimens such as various wires, plastics, and f..

[Daekyung Tech] Flame retardant tester (vertical type)Quote inquiry_ CS@roasexpo.comManufactured in accordance with KS and UL standards as well as test methods for combustibility of automobile interior materials,electric wires, and plastic materials.TYPE : VERTICALBURNER : BUTSENGAS : BUTANEINNER MATERIAL : STS 304OUTER MATERIAL : SS41 COATINGIGNIT..

[Daekyung Tech] Four-way valve testerQuote Contact_cs @roasexpo.comIt automatically controls the valve characteristics and durability leak in the vehicle or home air conditioner to judge product deformation or pass/fail.CAPACITY : 15 Mpa (50 ~ 150 kgf/㎠)DETECTOR : PRESSURE SENSORLOADING : AIR CYLINDERPRESSURE : AIR BOOSTER, CO2 GASCONTROL : P.C CON..

[Daekyung Tech] Hydraulic repeat testerQuote Contact_cs @roasexpo.comRepeatedly apply constant water pressure to metal pipes and clamps to observe crabs or deformations.CAPACITY : 5Mpa (50 kgf / ㎠)DETECTOR : PRESSURE SENSORLOADING : HYDRAULIC CULINDERPRESSURE LIQUID : WATERCONTROL : CONTROLSAMPLE : STEEL PIPE, STEEL CLAMPDEPOSIT : WATER OR AIR..

[Daekyung Tech] Cord creep testerQuote Contact_cs@roasexpo.comIt is an equipment manufactured for the purpose of performing a creep test by inserting a tire cord in the form of a rubber and molded belt for a specified time with a constant load and temperature...

[Daekyung Tech] Cord dryerQuote Contact_cs@roasexpo.comIt is an equipment manufactured for the purpose of research/development by heat-treating and, chemically treating tire cords, which are reinforcement materials for automobile tires, before mass production.CAPACITY : 300N X 7 mACCURACY : WITHIN ± 0.5 %HEATING : (RT ~ 300) ℃SPEED : 3 m/..

[Daekyung Tech] Chair durability testerQuote Contact_cs@roasexpo.comFor the purpose of inspecting the safety of home chairs, the characteristics and, durability are automatically controlled to determine the product's deformation or pass/fail.CAPACITY : 1 kN, 2 kNDETECTOR : LOAD CELLLOADING : AIR SERVO CYLINDERMOVING : MOTORCONTROL : P.C CONTROLSAMP..

[Daekyung Tech] Flexural Vibration TesterQuote Contact_cs@roasexpo.comBy giving bending and vibration due to fatigue of the plastic pipe material for sewage pipe,the product is judged pass/fail based on whether it is cracked or damaged. It is easy to use and has the advantage of high reproducibility.CAPACITY : 10 kNMODE : FORCE CYCLE, VIBRATION TES..