Search

[Daekyung Tech] Pipering stiffness testerQuote inquiry_ CS@roasexpo.comIt is a pipe RING STIFFNESS testing machine.ISO 9969ISO 13953ISO 6259meets the standards ofTest Spec.Maximum pipe diameter: 4 metersTest time: 42 daysMaximum compressive load: 100 kNThis test predicts in advance what kind of change in the inner diameter of the pipe willoccur aft..

[Daekyung Tech] Rockwell hardness tester (DTR-300N)Quote Contact_cs@roasexpo.com-Main functions and featuresIt is widely used for soft and hard metals, non-ferrous metals, and non-metals.It is an easy-to-operate and high-precision testing machine that can perform quick tests.The traces of the test are fine, so the processing of the test piece by ap..

[Daekyung Tech] Rockwell hardness tester (DTR-200N)Quote Contact_cs@roasexpo.comIt is a tester used to measure Rockwell hardness values ​​such as HRC and HRB.-main function1.There is no individual error when measuring with an automatic motor driving method.2. During the test, the indicator lamp lights up, and the test operation is simple and does n..

[Daekyung Tech] Ring crush compression testerQuote Contact_CS@roasexpo.comThis equipment tests the compressive strength of corrugated cardboard.The test is conducted under the conditions of RCT/ECT/FCT/FAT/CMT/CCT.The maximum load is 5,000 N and the test speed is up to 50 mm/min.Depending on the test method, various pressing jigs are used...

[Daekyung Tech] Motor type bending Wdaring TesterQuote Contact_CS@roasexpo.comIt is manufactured for the purpose of researching and developing the resistance,fatigue recovery, and deformation characteristics of materials by applying fatigue to various materials with the power of the motor...

[Daekyung Tech] Vibration tester (hydraulic servo control type)Quote Contact_CS@roasexpo.comThe hydraulic exciter is an excitation for modal testing of parts and equipment,and it is a testing machine that can perform vibration fatigue of parts and equipment.Since high-frequency motion is required rather than low-frequency motion due to the characte..

[Daekyung Tech] Universal Formability TesterQuote Contact@CS@roasexpo.comIt is a method of evaluating the formability and workability of steel sheet materials,and it is designed and manufactured as a PC control type as an equipment to test the phenomenon of plastic deformation without judgment of the material.Product Name: Universal Formability Tes..

[Daekyung Tech] Pipe test machineQuote Contact@CS@roasexpo.comIt has been produced for the purpose of reaching the goal by applying the Cracky or Academic Ratio by dividing iron and non-metallic pipes into 8 equal parts...

[Daekyung Tech] Stabilizer pushing force testerQuote Contact_CS@roasexpo.comThis equipment is manufactured for the purpose of testing and managing the stopper clamping force of the vehicle suspension device,the stabilizer, after mass production, or for research/development before mass production.CAPACITY: 20kNLOADING : SERVO MOTORMODE : CLAMPING FO..

[Daekyung Tech] Real load force calibrator 10kNQuote Contact_CS@roasexpo.comIt is a standard calibration device that is used for calibration and testing of electric force measuring instruments (load cells), and is calibrated by accurate weight including local gravitational acceleration.It is an instrument for calibrating force measuring instruments..

[Daekyung Tech] Weather strip Endurance testerQuote Contact_CS@roasexpo.comIt is an equipment manufactured for the purpose of durability test,research and development by repeatedly opening and closing windows while periodically supplying temperature, humidity, dust and water to the exterior dust strip of the vehicle.LOADING : AIR CYLINDERMODE : CYC..

[Daekyung Tech] Torsion testerQuote Contact_ cs@roasexpo.comIt can test and measure the breaking torque, axial force, angle,and forward/reverse torque force of small bolts. It consists of an X-Y table, a balance weight, and a pressure weight.CAPACITY : 100N.mACCURACY : WITHIN ± 0.8%RESOLUTION : 1/200,000 F.S.CAMPLE FIX : X-Y TABLECENTERING : ..

[Daekyung Tech] Torsional testing machineQuote Contact_ cs@roasexpo.comIt is manufactured for the purpose of research/development by measuring the rotational force attenuation when the complex structure metal round material is rotated at high speed and the rotational force is removed or the deformation caused by the centrifugal force.PRM : ~ 20,000..

[Daekyung Tech] Salt spray chamberQuote Contact_ cs@roasexpo.comIt is manufactured to observe corrosion resistance test by generating corrosion of metal.The internal size varies depending on the option, and it is manufactured to enable complex corrosion.This is a testing machine that mainly sprays salt water on a metal sample to check the degree of..

[Daekyung Tech] Low-temperature impact testerQuote inquiry_ CS@roasexpo.comThis tester is a device that can perform both low-temperature impact and winding tests.It is also used to test the reliability, durability, and lifespan of various samples such as mechanical parts, electrical, electronic, chemical, metal, and ceramics...

[Daekyung Tech] Thermal shock testerQuote Contact_ cs@roasexpo.comThe purpose is to observe the deformation of the product or sample by rapidly changing the temperature,and the composition of the device is classified into a high-temperature and low-temperature preheating room and a room temperature room.TYPE : 3 ZONEINNER SIZE : ORDER MADETEST TE..

[Daekyung Tech] Thermal shock tester (2Zone)Quote Contact_ cs@roasexpo.comThis device is a tester to check whether there is any abnormality in the sample due to sudden temperature change by moving the sample to the hightemperature room and the freezing room within a short time.It is a device designed and manufactured so that temperature changes a..

[Daekyung Tech] Medium-to-large high-speed cutting machineQuote Contact_ cs@roasexpo.comIt is manufactured to cut medium-sized specimens precisely and automatically.Cutting size: 160 X 145 or Ø 154Speed ​​(RPM): 1000 ~ 4000 rpmWheel size: Ø 400 mmAuto/Manual : Orderer's specificationIt can be produced with automatic table movement or manual handle..

[Daekyung Tech] Notching molding machineQuote Contact_ cs@roasexpo.comA compact machine capable of making V-notches for plastic impact specimens.V NOTCH CUTTER : Ø75mmSPEED : (40 ~ 80) rpmSAMPLE : PLASTIC IMPACT SAMPLEMOVING : X-Y TABLEPOWER : 220V, 1PH, 1kW..

[Daekyung Tech] Tire cord heat treatment testerQuote Contact_cs@roasexpo.comFiber cord is a direct material and reinforcement material due to technological advancement, and a large amount of it is used for hoses, belts, tires, and other elements. However, the requirements in the industrial field require the production of cords that can be used in a..

[Daekyung Tech] Tire cord bending testerQuote Contact_CS@roasexpo.comIt is an equipment that tests the durability of the cord inserted into the tire through the bending test at high temperature.CAPACITY : 100 kgf X 3 AXLESLOADING : CAM & MOTORTEMPERATURE : (RT ~ 150) ℃ANGLE : (0 ~ 30) ℃CONTROL : SEMI-AUTODEAD WEIGHT : 100 kgfCAM ADJUST : M..