Search

[Daekyung Tech] Rockwell type hardness testerQuote Contact_cs@roasexpo.comIt is a load cell type complex hardness tester.Rockwell, Superficial, and Brinell hardness tests of 187.5 kgf are possible.Fully automatic testing is possible with the touch screen method.It has a displacement precision of 0.2 microns to ensure accurate data.It has a load acc..

[Daekyung Tech] Rockwell hardness tester (DTR-300N)Quote Contact_cs@roasexpo.com-Main functions and featuresIt is widely used for soft and hard metals, non-ferrous metals, and non-metals.It is an easy-to-operate and high-precision testing machine that can perform quick tests.The traces of the test are fine, so the processing of the test piece by ap..

[Daekyung Tech] Rockwell hardness tester (DTR-200N)Quote Contact_cs@roasexpo.comIt is a tester used to measure Rockwell hardness values ​​such as HRC and HRB.-main function1.There is no individual error when measuring with an automatic motor driving method.2. During the test, the indicator lamp lights up, and the test operation is simple and does n..

[Daekyung Tech] Spring tester 30 kNQuote Contact_CS@roasexpo.comIt is a spring tester of up to 30 kN.It has a normal UTM frame, but it has been modified to fit the spring test.Due to the nature of the high-load spring, if a single load cell is used, it is easily damaged due to the influence of the eccentric load.Daekyung Tech's products are designe..

[Daekyung Tech] Spring tester 5kNQuote Contact_CS@roasexpo.comThis equipment is used to find the spring constant K of a general coil spring.It is designed to be tested in both tensile and compressive directions.You can run the test simply by using the touch screen.The free height of the spring can be measured automatically at the start of the test...

[Daekyung Tech] Taber wear testerQuote Contact@CS@roasexpo.comIt is a testing machine that evaluates the abrasion of various materials such as leather, polymers, and non-metals with a wear wheel with a set standard...

[Daekyung Tech] Stabilizer pushing force testerQuote Contact_CS@roasexpo.comThis equipment is manufactured for the purpose of testing and managing the stopper clamping force of the vehicle suspension device,the stabilizer, after mass production, or for research/development before mass production.CAPACITY: 20kNLOADING : SERVO MOTORMODE : CLAMPING FO..

[Daekyung Tech] Rubber durometer calibratorQuote Contact_CS@roasexpo.comIt is an equipment to check the load of rubber and plastic hardness testers (Shore, A, B, C, D types).This equipment is used for calibration and testing of electric or dial-type rubber durometers,and has the advantage of being easy to use and highly reproducible.CAPACITY : (0 ~..

[Daekyung Tech] Tire durability testerQuote Contact_ CS@roasexpo.comThis is a testing machine designed to test the durability of tires.The wear resistance of tires is tested by creating an environment similar to real driving conditions.It is an equipment that obtains results by measuring the characteristics of a tire by rotating a vehicle tire unde..

[Daekyung Tech] Seat frame strength testerQuote Contact_ CS@roasexpo.comIt is a testing machine that tests the frame rigidity of automobile seats.Secure the seat frame to the T-slot bed at the back and pull it with a chain to test its strength.In consideration of the load transfer during an automobile accident or sudden braking, the test is carried..

[Daekyung Tech] Seat belt spring testerQuote Contact_CS@roasexpo.comThis equipment tests the durability of the spring used in seat belts.Durability is verified by repeatedly performing millions of tests in clockwise and counterclockwise directions.Depending on the number of samples, various sizes can be produced.LOADING : SERVO MOTORMODE : CW &..

[Daekyung Tech] Spring steel deformation simulation testerQuote Contact_CS@roasexpo.comAfter performing a characteristic test of the spring for automobile seat belt by rotating it forward and backward as much as a prescribed angle,it is checked to determine the deformation or characteristics of the material.CAPACITY : 50 N.mLOADING : SERVO MOTORMOD..

[Daekyung Tech] Torsion testerQuote Contact_ cs@roasexpo.comIt can test and measure the breaking torque, axial force, angle,and forward/reverse torque force of small bolts. It consists of an X-Y table, a balance weight, and a pressure weight.CAPACITY : 100N.mACCURACY : WITHIN ± 0.8%RESOLUTION : 1/200,000 F.S.CAMPLE FIX : X-Y TABLECENTERING : ..

[Daekyung Tech] Torsional testing machineQuote Contact_ cs@roasexpo.comIt is manufactured for the purpose of research/development by measuring the rotational force attenuation when the complex structure metal round material is rotated at high speed and the rotational force is removed or the deformation caused by the centrifugal force.PRM : ~ 20,000..

[Daekyung Tech] Rotational bending testerQuote Contact_CS@roasexpo.comIt is manufactured to perform 4-point bending tests of various wire rods and, round materials, and environmental devices can be attached on demand.CAPACITY : 100 N.mCONTROL : SEMI-AUTO, MANUALSAMPLE : Ø 10 mmSPEED : (1,500 ~ 3,000) rpmLOADING : MOTOR WEIGHT : 100 kgCHUC..

[Daekyung Tech] Salt spray chamberQuote Contact_ cs@roasexpo.comIt is manufactured to observe corrosion resistance test by generating corrosion of metal.The internal size varies depending on the option, and it is manufactured to enable complex corrosion.This is a testing machine that mainly sprays salt water on a metal sample to check the degree of..

[Daekyung Tech] Thermo-hygrostatQuote Contact_cs@roasexpo.comThe purpose is to observe the deformation of the product or sample by gradually changing the temperature and, humidity or applying a continuous environment, and it can be manufactured according to the order.INNER SIZE : (500 X 500 X 600) mmTEST TEMP : (-40 ~ 150) ℃HUMIDITY : (30 ~ 98..

[Daekyung Tech] Thermal shock testerQuote Contact_ cs@roasexpo.comThe purpose is to observe the deformation of the product or sample by rapidly changing the temperature,and the composition of the device is classified into a high-temperature and low-temperature preheating room and a room temperature room.TYPE : 3 ZONEINNER SIZE : ORDER MADETEST TE..

[Daekyung Tech] Thermal shock tester (2Zone)Quote Contact_ cs@roasexpo.comThis device is a tester to check whether there is any abnormality in the sample due to sudden temperature change by moving the sample to the hightemperature room and the freezing room within a short time.It is a device designed and manufactured so that temperature changes a..

[Daekyung Tech] Rupture TesterQuote Contact_cs @roasexpo.comDeformation or pass/fail of a product is judged for the purpose of rupturing the metal or non-metal pipe of a vehicle under high pressure or testing the durability or characteristics up to the target pressure.CAPACITY : (10 ~ 200) Mpa (100 ~ 2000 kgf / ㎠ )DETECTOR : HYD. CYLINDERPRESS..

[Daekyung Tech] Tire CutterQuote Contact_ cs@roasexpo.comThis equipment cuts vehicle tires according to the user's intention.CAPACITY : Ø 510mm X 4.5 tSPEED : 1,700 rpmCONTROL : MANUALLOADING : MOTOR, 3 HpSAMPLE : TIRE..

[Daekyung Tech] Specimen pressQuote Contact_ cs@roasexpo.comWe manufacture rubber and plastic samples of various sizes using inflow.CAPACITY : (100, 200, 300, 500) kNTYPE : HYDRAULIC CYLINDERTEMP : RT, 350 ℃MOLD : ORDER MADEPOWER : 220V, 3PH, (2 ~5) kW..

[Daekyung Tech] Screen door testerQuote Contact_cs@roasexpo.comIt is designed and manufactured as a device that tests whether a sample is cracked or broken by reproducing the pressure applied to the screen door,a safety facility at a railway station, under similar conditions.CAPACITY : 400mmAgDETECTOR : LOAD CELL, LVD SENSORLOADING : HYDRAULIC CYLI..

[Daekyung Tech] Tire cord heat treatment testerQuote Contact_cs@roasexpo.comFiber cord is a direct material and reinforcement material due to technological advancement, and a large amount of it is used for hoses, belts, tires, and other elements. However, the requirements in the industrial field require the production of cords that can be used in a..

[Daekyung Tech] Tire cord bending testerQuote Contact_CS@roasexpo.comIt is an equipment that tests the durability of the cord inserted into the tire through the bending test at high temperature.CAPACITY : 100 kgf X 3 AXLESLOADING : CAM & MOTORTEMPERATURE : (RT ~ 150) ℃ANGLE : (0 ~ 30) ℃CONTROL : SEMI-AUTODEAD WEIGHT : 100 kgfCAM ADJUST : M..