[Daekyung Tech] Pipering stiffness testerQuote inquiry_ CS@roasexpo.comIt is a pipe RING STIFFNESS testing machine.ISO 9969ISO 13953ISO 6259meets the standards ofTest Spec.Maximum pipe diameter: 4 metersTest time: 42 daysMaximum compressive load: 100 kNThis test predicts in advance what kind of change in the inner diameter of the pipe willoccur aft..

[Daekyung Tech] Rockwell type hardness testerQuote Contact_cs@roasexpo.comIt is a load cell type complex hardness tester.Rockwell, Superficial, and Brinell hardness tests of 187.5 kgf are possible.Fully automatic testing is possible with the touch screen method.It has a displacement precision of 0.2 microns to ensure accurate data.It has a load acc..

[Daekyung Tech] Pencil hardness testerQuote Contact_cs@roasexpo.comThe tester is easy to operate and is a pencil hardness tester designed to be used to test the thickness and hardness of cutting boards such as paints and films.For the test, apply the lead of a pencil specified in KS G 2603 at an angle of 45 degrees to the drawing,and use it to scra..

[Daekyung Tech] Rockwell hardness tester (DTR-300N)Quote Contact_cs@roasexpo.com-Main functions and featuresIt is widely used for soft and hard metals, non-ferrous metals, and non-metals.It is an easy-to-operate and high-precision testing machine that can perform quick tests.The traces of the test are fine, so the processing of the test piece by ap..

[Daekyung Tech] Rockwell hardness tester (DTR-200N)Quote Contact_cs@roasexpo.comIt is a tester used to measure Rockwell hardness values ​​such as HRC and HRB.-main function1.There is no individual error when measuring with an automatic motor driving method.2. During the test, the indicator lamp lights up, and the test operation is simple and does n..

[Daekyung Tech] Spring tester 30 kNQuote Contact_CS@roasexpo.comIt is a spring tester of up to 30 kN.It has a normal UTM frame, but it has been modified to fit the spring test.Due to the nature of the high-load spring, if a single load cell is used, it is easily damaged due to the influence of the eccentric load.Daekyung Tech's products are designe..

[Daekyung Tech] Spring tester 5kNQuote Contact_CS@roasexpo.comThis equipment is used to find the spring constant K of a general coil spring.It is designed to be tested in both tensile and compressive directions.You can run the test simply by using the touch screen.The free height of the spring can be measured automatically at the start of the test...

[Daekyung Tech] Ring crush compression testerQuote Contact_CS@roasexpo.comThis equipment tests the compressive strength of corrugated cardboard.The test is conducted under the conditions of RCT/ECT/FCT/FAT/CMT/CCT.The maximum load is 5,000 N and the test speed is up to 50 mm/min.Depending on the test method, various pressing jigs are used...

[Daekyung Tech] Pipe test machineQuote Contact@CS@roasexpo.comIt has been produced for the purpose of reaching the goal by applying the Cracky or Academic Ratio by dividing iron and non-metallic pipes into 8 equal parts...

[Daekyung Tech] Real Load Torque Calibrator (100~200) N.mQuote Contact_CS@roasexpo.comThis equipment is used for calibration and testing of electric torque measuring instruments (torque cells).It is a real load torque calibrator with a maximum capacity of 2000 N.m.Equipment supplied to Kia Motors.F2 class weights are used, and clockwise/counterclo..

[Daekyung Tech] Real load torque calibrator 30kN (special specification)Quote Contact_CS@roasexpo.comIt is a device that can calibrate a torque sensor with an actual load.Maximum measuring capacity: 30 kNA variety of weights are applied to accurately measure torque.Used by the Republic of Korea Army.CAPACITY :  (100, 500, 1,000, 2,000)N.mCONTR..

[Daekyung Tech] Rubber durometer calibratorQuote Contact_CS@roasexpo.comIt is an equipment to check the load of rubber and plastic hardness testers (Shore, A, B, C, D types).This equipment is used for calibration and testing of electric or dial-type rubber durometers,and has the advantage of being easy to use and highly reproducible.CAPACITY : (0 ~..

[Daekyung Tech] Real load torque calibrator 100 NMQuote Contact_CS@roasexpo.comIt is a device for correcting torque.The maximum torque is 100 NM, automatically sets the weight, and is designed to measure clockwise/counterclockwise torque.All courses are conducted through Daekyung Tech's dedicated program.The above products are being supplied and us..

[Daekyung Tech] Real load torque calibrator 100 NMQuote Contact_CS@roasexpo.comIt is a device for correcting torque.The maximum torque is 100 NM, automatically sets the weight, and is designed to measure clockwise/counterclockwise torque.All courses are conducted through Daekyung Tech's dedicated program.The above products are being supplied and us..

[Daekyung Tech] Real load force calibrator 10kNQuote Contact_CS@roasexpo.comIt is a standard calibration device that is used for calibration and testing of electric force measuring instruments (load cells), and is calibrated by accurate weight including local gravitational acceleration.It is an instrument for calibrating force measuring instruments..

[Daekyung Tech] Push-pull gauge calibratorQuote Contact_CS@roasexpo.comThis equipment is used for calibration and testing of electric or dial-type push-pull gauges.CAPACITY :  ( 2 ~ 2,000) NCONTROL : MANUALLOADING : DEAD WEIGHTDEAD WEIGHT : STEEL COATING, F2 GRADEMODE : TENSILE , COMPRESSION..

[Daekyung Tech] Seat frame strength testerQuote Contact_ CS@roasexpo.comIt is a testing machine that tests the frame rigidity of automobile seats.Secure the seat frame to the T-slot bed at the back and pull it with a chain to test its strength.In consideration of the load transfer during an automobile accident or sudden braking, the test is carried..

[Daekyung Tech] Seat belt spring testerQuote Contact_CS@roasexpo.comThis equipment tests the durability of the spring used in seat belts.Durability is verified by repeatedly performing millions of tests in clockwise and counterclockwise directions.Depending on the number of samples, various sizes can be produced.LOADING : SERVO MOTORMODE : CW &..

[Daekyung Tech] Spring steel deformation simulation testerQuote Contact_CS@roasexpo.comAfter performing a characteristic test of the spring for automobile seat belt by rotating it forward and backward as much as a prescribed angle,it is checked to determine the deformation or characteristics of the material.CAPACITY : 50 N.mLOADING : SERVO MOTORMOD..

[Daekyung Tech] Rotational bending testerQuote Contact_CS@roasexpo.comIt is manufactured to perform 4-point bending tests of various wire rods and, round materials, and environmental devices can be attached on demand.CAPACITY : 100 N.mCONTROL : SEMI-AUTO, MANUALSAMPLE : Ø 10 mmSPEED : (1,500 ~ 3,000) rpmLOADING : MOTOR WEIGHT : 100 kgCHUC..

[Daekyung Tech] Salt spray chamberQuote Contact_ cs@roasexpo.comIt is manufactured to observe corrosion resistance test by generating corrosion of metal.The internal size varies depending on the option, and it is manufactured to enable complex corrosion.This is a testing machine that mainly sprays salt water on a metal sample to check the degree of..

[Daekyung Tech] Rupture TesterQuote Contact_cs @roasexpo.comDeformation or pass/fail of a product is judged for the purpose of rupturing the metal or non-metal pipe of a vehicle under high pressure or testing the durability or characteristics up to the target pressure.CAPACITY : (10 ~ 200) Mpa (100 ~ 2000 kgf / ㎠ )DETECTOR : HYD. CYLINDERPRESS..

[Daekyung Tech] Specimen pressQuote Contact_ cs@roasexpo.comWe manufacture rubber and plastic samples of various sizes using inflow.CAPACITY : (100, 200, 300, 500) kNTYPE : HYDRAULIC CYLINDERTEMP : RT, 350 ℃MOLD : ORDER MADEPOWER : 220V, 3PH, (2 ~5) kW..

[Daekyung Tech] Notching molding machineQuote Contact_ cs@roasexpo.comA compact machine capable of making V-notches for plastic impact specimens.V NOTCH CUTTER : Ø75mmSPEED : (40 ~ 80) rpmSAMPLE : PLASTIC IMPACT SAMPLEMOVING : X-Y TABLEPOWER : 220V, 1PH, 1kW..

[Daekyung Tech] Screen door testerQuote Contact_cs@roasexpo.comIt is designed and manufactured as a device that tests whether a sample is cracked or broken by reproducing the pressure applied to the screen door,a safety facility at a railway station, under similar conditions.CAPACITY : 400mmAgDETECTOR : LOAD CELL, LVD SENSORLOADING : HYDRAULIC CYLI..