[Daekyung Tech] Mechanical universal testing machineQuote Contact_cs@roasexpo.comThe lower part of the product is designed to open together in three directions,and the motor driver and control parts of the machine are placed on a shelf on the rail, enabling convenient AS.Precise driving methodIt is designed for precise and quiet operation as ..

[Daekyung Tech] Hydraulic universal testing machineQuote Contact_cs@roasexpo.comThe DTU-HS series is an entry-level model of the H series.Both models share the same test specifications, but if the stroke of the HS series is shorter by 50mm,the overall size is small, and only models of 500kN and 1 MN can be manufactured, and it is safe for companies..

[Daekyung Tech] Hydraulic universal material testing machineQuote Contact_cs@roasexpo.comThe hydraulic universal testing machine is used for high-capacity samples of 50 tons or more.The main cylinder that applies the load as well as the chuck that holds the sample are operated by a small hydraulic cylinder.The testable MAX.STROKE of the main cylind..

[Daekyung Tech] Izod impact testerQuote inquiry_ CS@roasexpo.comASTM E23ASTM D256ISO179conforms toIt is a digital type Izod small impact tester.The angle of the weight and the impact energy value after the test are automatically calculated and displayed.specificationCapacity: 3J, 6J, 15JMaximum tensile angle: 120 degreesWeight of weight: 2.44 kgSiz..

[Daekyung Tech] Izod impact testerQuote inquiry_ CS@roasexpo.comASTM E23ASTM D256ISO179It meets the specifications.The Izod impact tester is generally used to measure the impact energy of non-metallic samples.specificationCapacity: 3J, 6J, 15JMaximum tensile angle: 120 degreesWeight of weight: 2.44 kgSize: 560 x 400 x 450 mmTotal weight: about 50 k..

[Daekyung Tech] Motor type bending Wdaring TesterQuote Contact_CS@roasexpo.comIt is manufactured for the purpose of researching and developing the resistance,fatigue recovery, and deformation characteristics of materials by applying fatigue to various materials with the power of the motor...

[Daekyung Tech] High-strength pipe bending fatigue testerQuote Contact_CS@roasexpo.comIt is manufactured for the purpose of researching and developing the resistance,fatigue recovery, and deformation characteristics of materials by applying pressure and seismic waves with hydraulic force to various materials...

[Daekyung Tech] Horizontal tensile fatigue testerQuote Contact_CS@roasexpo.comIt is manufactured for the purpose of research and development or judging the resistance, fatigue recovery,and deformation characteristics of materials by applying hydraulic force to various materials...

[Daekyung Tech] Mobile phone wear testerQuote Contact@CS@roasexpo.comThis equipment is a device that measures the lifespan of the contact point when charging the cell phone battery through an endurance test...

[Daekyung Tech] Hydraulic wear testerQuote Contact_CS@roasexpo.comIt is manufactured for the purpose of analyzing, researching,and developing the characteristics of the sample after the durability test is completed by applying torsion after applying a constant load to the thrust bearing.CAPACITY : TORQUE 3 kN.m / FORCE 100kNACCURACY : WITHIN ±1 %CO..

[Daekyung Tech] Hydraulic force calibratorQuote Contact_CS@roasexpo.comThis equipment is used for calibration and testing of electric force measuring instruments (load cells), and is used to correct the difference between the high-precision master cell,  and the device to be calibrated or to issue a report by the calibration procedure.It is a ..

[Daekyung Tech] Hydraulic force calibratorQuote Contact_CS@roasexpo.comIt is a hydraulic force calibrator with a capacity of 5 MN (approximately 500 tons).It has an uncertainty of 0.05% and is equipped with a two-stage master cell of 5 MN + 2 MN.Tensile/compression bidirectional measurement is possible.It was delivered to VMI in Hanoi, Vietnam, whi..

[Daekyung Tech] Hydraulic force calibrator 1 MNQuote Contact_CS@roasexpo.comThis equipment is used for calibration and testing of electric force measuring instruments (load cells), and is used to correct the difference between the high-precision master cell,  and the device to be calibrated or to issue a report by the calibration procedure.It ..

[Daekyung Tech] Hydraulic force calibrator 20kNQuote Contact_CS@roasexpo.comThis equipment is used for calibration and testing of electric force measuring instruments (load cells), and is used to correct the difference between the high-precision master cell,  and the device to be calibrated or to issue a report by the calibration procedure.It ..

[Daekyung Tech] Hydraulic force calibrator 50kNQuote Contact_CS@roasexpo.comThis equipment is used for calibration and testing of electric force measuring instruments (load cells), and is used to correct the difference between the high-precision master cell,  and the device to be calibrated or to issue a report by the calibration procedure.It ..

[Daekyung Tech] Hose Clamp TesterQuote Contact@CS@roasexpo.comThis equipment tests the strength of hose clamps for vehicles.Measure the force by pulling the hose clamp in three directions, equally spaced at 120 degrees.It is a device for measuring the clamping force of "SUS wire clamp" for automobile hoses,and it is a device to measure the force us..

[Daekyung Tech] Hot torsion testing machineQuote Contact_ cs@roasexpo.comIt is manufactured for the purpose of researching and developing the deformation and, characteristics of materials by rapidly heating various round and wire rods to high temperature and rotating them at high speed.CAPACITY : 200 kN.mACCURACY : WITHIN ± 1%TABLE : X AXIS SL..

[Daekyung Tech] Low-temperature impact testerQuote inquiry_ CS@roasexpo.comThis tester is a device that can perform both low-temperature impact and winding tests.It is also used to test the reliability, durability, and lifespan of various samples such as mechanical parts, electrical, electronic, chemical, metal, and ceramics...

[Daekyung Tech] MITQuote Contact_cs @roasexpo.comBy measuring the fluidity in the molten state of the resin, the physical properties (strength, flow chart) and, raw materials of the material are inspected, so defective products can be prevented in advance. is a device for measuring..

[Daekyung Tech] Hydraulic repeat testerQuote Contact_cs @roasexpo.comRepeatedly apply constant water pressure to metal pipes and clamps to observe crabs or deformations.CAPACITY : 5Mpa (50 kgf / ㎠)DETECTOR : PRESSURE SENSORLOADING : HYDRAULIC CULINDERPRESSURE LIQUID : WATERCONTROL : CONTROLSAMPLE : STEEL PIPE, STEEL CLAMPDEPOSIT : WATER OR AIR..

[Daekyung Tech] Metal specimen model cutting machineQuote Contact_ cs@roasexpo.comThis cutter can cut various metals up to 24mm in diameter.SPIRAL CUTTER : Ø24mmSPEED : (100 ~ 1,800) rpmSAMPLE : AL, STEELJIG : 1 SETPOWER 220V, 1PH, 1kW..

[Daekyung Tech] Mounting pressQuote Contact_ cs@roasexpo.comThis is a newly built DTM-1 mounting press.The temperature difference between the upper and lower parts of the cylinder has been reduced by doubling the heating coil that applies heat.The result is clean, uniform samples.The handle of the cylinder cap has been greatly expanded and designe..

[Daekyung Tech] Medium-sized high-speed cutting machineQuote Contact_ cs@roasexpo.comIt cuts at high speed for quick and simple cutting of medium-sized commercial plates.Sample size: 85 X 85 mm or Ø 95 mmWheel Speed: 300~3600 RPMWheel size: Ø 250 ~ 305 mmSince the lower part is made of a single cast, there is no case of leakage of lubricant and no..

[Daekyung Tech] Medium-to-large high-speed cutting machineQuote Contact_ cs@roasexpo.comIt is manufactured to cut medium-sized specimens precisely and automatically.Cutting size: 160 X 145 or Ø 154Speed ​​(RPM): 1000 ~ 4000 rpmWheel size: Ø 400 mmAuto/Manual : Orderer's specificationIt can be produced with automatic table movement or manual handle..

[Daekyung Tech] Low speed precision cutting machineQuote Contact_ cs@roasexpo.comIt is cut at low speed with a diamond wheel so that small specimens can be cut precisely.CAPACITY : (25 X 25) mm, Ø30 mmSPEED : (30 ~ 500) prmWHEEL : DIAMOND WHEELWHEEL DAI : Ø(75 ~ 125) mmLUBRICATION : SELF WETCUTTING : USING DEAD WEIGHTTYPE : MANUALPOWER :..