Category Features

Other Test Instruments

Grid View:
Quickview

[Daekyung Tech] Weather strip Endurance tester_ Opening/closing durability test, research and development purpose_ Made in KOREA

Ship from South Korea
(0)

[Daekyung Tech] Weather strip Endurance testerQuote Contact_CS@roasexpo.comIt is an equipment manufactured for the purpose of durability test,research and development by repeatedly opening and closing windows while periodically supplying temperature, humidity, dust and water to the exterior dust strip of the vehicle.LOADING : AIR CYLINDERMODE : CYC..

Quickview

[Daekyung Tech] Seat belt spring tester_forward and reverse rotation durability test, product change test_ Made in KOREA

Ship from South Korea
(0)

[Daekyung Tech] Seat belt spring testerQuote Contact_CS@roasexpo.comThis equipment tests the durability of the spring used in seat belts.Durability is verified by repeatedly performing millions of tests in clockwise and counterclockwise directions.Depending on the number of samples, various sizes can be produced.LOADING : SERVO MOTORMODE : CW &..

Quickview

[Daekyung Tech] Spring steel deformation simulation tester_ characteristic test, deformation, characteristic judgment, automobile seat belt simulation test_ Made in KOREA

Ship from South Korea
(0)

[Daekyung Tech] Spring steel deformation simulation testerQuote Contact_CS@roasexpo.comAfter performing a characteristic test of the spring for automobile seat belt by rotating it forward and backward as much as a prescribed angle,it is checked to determine the deformation or characteristics of the material.CAPACITY : 50 N.mLOADING : SERVO MOTORMOD..

Quickview

[Daekyung Tech] Transmission properties tester_ torque, torsion test, torsion characteristic measurement_ Made in KOREA

Ship from South Korea
(0)

[Daekyung Tech] Transmission properties testerQuote Contact@CS@roasexpo.comIt is a device that applies rotational force to the input stage of the transmission,and measures the torsion applied to the output stage 4 axes to obtain the result.CAPACITY : 50N.mRESOLUTION : WITHIN ± 1%CONTROL : P.C CONTROLMODE : TORQUE VS AVGLESAMPLE : STEERING SHAF..

Quickview

[Daekyung Tech] Torsion tester _ Torque force test, balance weight, pressurization weight _ Made in KOREA

Ship from South Korea
(0)

[Daekyung Tech] Torsion testerQuote Contact_ cs@roasexpo.comIt can test and measure the breaking torque, axial force, angle,and forward/reverse torque force of small bolts. It consists of an X-Y table, a balance weight, and a pressure weight.CAPACITY : 100N.mACCURACY : WITHIN ± 0.8%RESOLUTION : 1/200,000 F.S.CAMPLE FIX : X-Y TABLECENTERING : ..

Quickview

[Daekyung Tech] Torsional testing machine_ Centrifugal force deformation, rotational force attenuation measurement, R&D purpose _ Made in KOREA

Ship from South Korea
(0)

[Daekyung Tech] Torsional testing machineQuote Contact_ cs@roasexpo.comIt is manufactured for the purpose of research/development by measuring the rotational force attenuation when the complex structure metal round material is rotated at high speed and the rotational force is removed or the deformation caused by the centrifugal force.PRM : ~ 20,000..

Quickview

[Daekyung Tech] Hot torsion testing machine_ high-speed rotation, material deformation/characteristics, research and development purpose_ Made in KOREA

Ship from South Korea
(0)

[Daekyung Tech] Hot torsion testing machineQuote Contact_ cs@roasexpo.comIt is manufactured for the purpose of researching and developing the deformation and, characteristics of materials by rapidly heating various round and wire rods to high temperature and rotating them at high speed.CAPACITY : 200 kN.mACCURACY : WITHIN ± 1%TABLE : X AXIS SL..

Quickview

[Daekyung Tech] Rotational bending tester_ 4-point bending test possible, custom-made, environmental device can be attached_ Made in KOREA

Ship from South Korea
(0)

[Daekyung Tech] Rotational bending testerQuote Contact_CS@roasexpo.comIt is manufactured to perform 4-point bending tests of various wire rods and, round materials, and environmental devices can be attached on demand.CAPACITY : 100 N.mCONTROL : SEMI-AUTO, MANUALSAMPLE : Ø 10 mmSPEED : (1,500 ~ 3,000) rpmLOADING : MOTOR WEIGHT : 100 kgCHUC..

Quickview

[Daekyung Tech] Clutch disc torsion characteristic tester_for total inspection, data analysis program, computer control_ Made in KOREA

Ship from South Korea
(0)

[Daekyung Tech] Clutch disc torsion characteristic testerQuote Contact@CS@roasexpo.com[Summary] This is a precision equipment for total inspection to obtain the torsional torque and angle of the clutch disk for automobiles. It is driven by AC Servo Motor, and all control is done by computer, and it is a device that analyzes data by program.Tourque:..

Quickview

[Daekyung Tech] Bottle cap torque tester_Data automatic storage, special type of JAW use, latest data program_ Made in KOREA

Ship from South Korea
(0)

[Daekyung Tech] Bottle cap torque testerQuote Contact_cs@roasexpo.comThis is a tester that measures the torque generated when the bottle cap is opened.Data is displayed in units such as Nm, Ibf.in, etc., and test results are automatically saved in the desired folder.Up to 2 liter bottles can be tested, and samples from 12 to 24 can be adjusted acco..

Quickview

[Daekyung Tech] Dryer _ Rubber / Plastic / Wire test, shrinkage and aging test _ Made in KOREA

Ship from South Korea
(0)

[Daekyung Tech] DryerQuote Contact_ cs@roasexpo.comIt is designed and manufactured for the purpose of testing the shrinkage and aging state of specimens by heating rubber, plastic,and electric wires at high temperature.TEMP : (RT ~ 250) ℃INNER SIZE : (500 X 500 X 500) mmINNER MATERIAL : STS 304OUTER MATERIAL : SS41 COATINGCONTROL : P.I.K CONTR..

Quickview

[Daekyung Tech] Salt spray chamber_ metal corrosion, corrosion resistance test, complex corrosion_ Made in KOREA

Ship from South Korea
(0)

[Daekyung Tech] Salt spray chamberQuote Contact_ cs@roasexpo.comIt is manufactured to observe corrosion resistance test by generating corrosion of metal.The internal size varies depending on the option, and it is manufactured to enable complex corrosion.This is a testing machine that mainly sprays salt water on a metal sample to check the degree of..

Quickview

[Daekyung Tech] Thermo-hygrostat_ Sample deformation, observation, and custom-made possible_ Made in KOREA

Ship from South Korea
(0)

[Daekyung Tech] Thermo-hygrostatQuote Contact_cs@roasexpo.comThe purpose is to observe the deformation of the product or sample by gradually changing the temperature and, humidity or applying a continuous environment, and it can be manufactured according to the order.INNER SIZE : (500 X 500 X 600) mmTEST TEMP : (-40 ~ 150) ℃HUMIDITY : (30 ~ 98..

Quickview

[Daekyung Tech] Low-temperature impact tester_ winding test, sample durability test, life measurement test_ Made in KOREA

Ship from South Korea
(0)

[Daekyung Tech] Low-temperature impact testerQuote inquiry_ CS@roasexpo.comThis tester is a device that can perform both low-temperature impact and winding tests.It is also used to test the reliability, durability, and lifespan of various samples such as mechanical parts, electrical, electronic, chemical, metal, and ceramics...

Quickview

[Daekyung Tech] Oil resistance tester_ Heating of specimen, deformation of physical properties, simultaneous measurement of samples _ Made in KOREA

Ship from South Korea
(0)

[Daekyung Tech] Oil resistance testerQuote inquiry_ CS@roasexpo.comThis tester is a device that inspects physical properties by heating a specimen while stirring it at a high temperature in oil.Since it consists of 4 test tubes, 4 samples can be measured at the same time...

Quickview

[Daekyung Tech] Ozone tester_ Deterioration measurement, ozone investigation, ozone test_ Made in KOREA

Ship from South Korea
(0)

 [Daekyung Tech] Ozone testerQuote inquiry_ CS@roasexpo.comIn order to measure the deterioration of vulcanized rubber due to ozone in the atmosphere,it is designed and manufactured for the purpose of investigating and, testing ozone resistance by exposing a test piece to air containing a low concentration of ozone, which is artificially genera..

Quickview

[Daekyung Tech] Thermal shock tester_ sample deformation, material transfer type, sample stationary type_ Made in KOREA

Ship from South Korea
(0)

[Daekyung Tech] Thermal shock testerQuote Contact_ cs@roasexpo.comThe purpose is to observe the deformation of the product or sample by rapidly changing the temperature,and the composition of the device is classified into a high-temperature and low-temperature preheating room and a room temperature room.TYPE : 3 ZONEINNER SIZE : ORDER MADETEST TE..

Quickview

[Daekyung Tech] Thermal shock tester (2Zone)_ sample deformation, sample transfer type, sample fixing spirit_ Made in KOREA

Ship from South Korea
(0)

[Daekyung Tech] Thermal shock tester (2Zone)Quote Contact_ cs@roasexpo.comThis device is a tester to check whether there is any abnormality in the sample due to sudden temperature change by moving the sample to the hightemperature room and the freezing room within a short time.It is a device designed and manufactured so that temperature changes a..

Quickview

[Daekyung Tech] MIT_ Fluidity measurement, raw material inspection, resin quantity measurement_ Made in KOREA

Ship from South Korea
(0)

[Daekyung Tech] MITQuote Contact_cs @roasexpo.comBy measuring the fluidity in the molten state of the resin, the physical properties (strength, flow chart) and, raw materials of the material are inspected, so defective products can be prevented in advance. is a device for measuring..

Quickview

[Daekyung Tech] sour gasolin cycle tester_ Fuel Pipe Check, Coupler Check, Oil Leak Check_ Made in KOREA

Ship from South Korea
(0)

 [Daekyung Tech] sour gasolin cycle testerQuote Contact_cs @roasexpo.comOxidized gasoline is circulated in the fuel pipe for a certain period of time to check for leaks in the fuel pipe and coupler to determine the product's deformation or pass/fail.CAPACITY : 1.1 Mpa ( 11 kgf / ㎠ )DETECTOR : PRESSURE SENSORMODE : PRESSURE CYCLE, LEAK TES..

Quickview

[Daekyung Tech] Rupture Tester_ Durability Test, Characteristic Test, Product Deformation Judgment_ Made in KOREA

Ship from South Korea
(0)

[Daekyung Tech] Rupture TesterQuote Contact_cs @roasexpo.comDeformation or pass/fail of a product is judged for the purpose of rupturing the metal or non-metal pipe of a vehicle under high pressure or testing the durability or characteristics up to the target pressure.CAPACITY : (10 ~ 200) Mpa (100 ~ 2000 kgf / ㎠ )DETECTOR : HYD. CYLINDERPRESS..

Quickview

[Daekyung Tech] Four-way valve tester_ valve characteristic tester, valve durability tester, automatic leak control_ Made in KOREA

Ship from South Korea
(0)

[Daekyung Tech] Four-way valve testerQuote Contact_cs @roasexpo.comIt automatically controls the valve characteristics and durability leak in the vehicle or home air conditioner to judge product deformation or pass/fail.CAPACITY : 15 Mpa (50 ~ 150 kgf/㎠)DETECTOR : PRESSURE SENSORLOADING : AIR CYLINDERPRESSURE : AIR BOOSTER, CO2 GASCONTROL : P.C CON..

Quickview

[Daekyung Tech] Air leak tester_ air measurement, sample tester, high reproducibility_ Made in KOREA

Ship from South Korea
(0)

 [Daekyung Tech] Air leak testerQuote Contact_cs @roasexpo.comBy measuring a certain amount of air leakage in the sample (product),the pass/fail of the product is judged. It is easy to use and has the advantage of high reproducibility.CAPACITY : 0.5 Mpa (0~5 kgf / ㎠)DETECTOR : PRESSURE SENSORLOADING : AIR CYLINDERPRESSURE : AIRCONTROL : SEMI-A..

Quickview

[Daekyung Tech] Hydraulic repeat tester_ metal pipe tester, crack observation, deformation observation_ Made in KOREA

Ship from South Korea
(0)

[Daekyung Tech] Hydraulic repeat testerQuote Contact_cs @roasexpo.comRepeatedly apply constant water pressure to metal pipes and clamps to observe crabs or deformations.CAPACITY : 5Mpa (50 kgf / ㎠)DETECTOR : PRESSURE SENSORLOADING : HYDRAULIC CULINDERPRESSURE LIQUID : WATERCONTROL : CONTROLSAMPLE : STEEL PIPE, STEEL CLAMPDEPOSIT : WATER OR AIR..

Quickview

[Daekyung Tech] Bursting strength tester_ sample tester, bursting strength measurement, digital type_ Made in KOREA

Ship from South Korea
(0)

[Daekyung Tech] Bursting strength testerQuote Contact_cs @roasexpo.comIt is designed and manufactured in digital type as equipment used to measure the breaking strength of various papers,woven fabrics, films, and corrugated cardboard.Input power: AC 220V, 60HzPower consumption: 0.5kWMaximum capacity: 50kgf/㎠Load display: DigitalDevice Size: (600X50..

Showing 26 to 50 of 113 (5 Pages)