Category Features

Test Instruments

Grid View:
Quickview

[Daekyung Tech] Rubber durometer calibrator_ electric type, dial type, calibration and test_ Made in KOREA

Ship from South Korea
(0)

[Daekyung Tech] Rubber durometer calibratorQuote Contact_CS@roasexpo.comIt is an equipment to check the load of rubber and plastic hardness testers (Shore, A, B, C, D types).This equipment is used for calibration and testing of electric or dial-type rubber durometers,and has the advantage of being easy to use and highly reproducible.CAPACITY : (0 ~..

Quickview

[Daekyung Tech] Real load torque calibrator 100 NM_ Electric torque measurement, calibration and test, accurate weight_ Made in KOREA

Ship from South Korea
(0)

[Daekyung Tech] Real load torque calibrator 100 NMQuote Contact_CS@roasexpo.comIt is a device for correcting torque.The maximum torque is 100 NM, automatically sets the weight, and is designed to measure clockwise/counterclockwise torque.All courses are conducted through Daekyung Tech's dedicated program.The above products are being supplied and us..

Quickview

[Daekyung Tech] Real load torque calibrator_ Electric torque measurement, calibration and test, accurate weight_ Made in KOREA

Ship from South Korea
(0)

[Daekyung Tech] Real load torque calibrator 100 NMQuote Contact_CS@roasexpo.comIt is a device for correcting torque.The maximum torque is 100 NM, automatically sets the weight, and is designed to measure clockwise/counterclockwise torque.All courses are conducted through Daekyung Tech's dedicated program.The above products are being supplied and us..

Quickview

[Daekyung Tech] Hydraulic force calibrator_calibration and test, electric force measuring instrument, certificate issuance_ Made in KOREA

Ship from South Korea
(0)

[Daekyung Tech] Hydraulic force calibratorQuote Contact_CS@roasexpo.comThis equipment is used for calibration and testing of electric force measuring instruments (load cells), and is used to correct the difference between the high-precision master cell,  and the device to be calibrated or to issue a report by the calibration procedure.It is a ..

Quickview

[Daekyung Tech] Real load force calibrator 10kN_ Electric force measuring instrument, calibration and test, accurate weight_ Made in KOREA

Ship from South Korea
(0)

[Daekyung Tech] Real load force calibrator 10kNQuote Contact_CS@roasexpo.comIt is a standard calibration device that is used for calibration and testing of electric force measuring instruments (load cells), and is calibrated by accurate weight including local gravitational acceleration.It is an instrument for calibrating force measuring instruments..

Quickview

[Daekyung Tech] Hydraulic force calibrator_ Electric force measuring instrument, calibration and test, issuance of report_ Made in KOREA

Ship from South Korea
(0)

[Daekyung Tech] Hydraulic force calibratorQuote Contact_CS@roasexpo.comIt is a hydraulic force calibrator with a capacity of 5 MN (approximately 500 tons).It has an uncertainty of 0.05% and is equipped with a two-stage master cell of 5 MN + 2 MN.Tensile/compression bidirectional measurement is possible.It was delivered to VMI in Hanoi, Vietnam, whi..

Quickview

[Daekyung Tech] Push-pull gauge calibrator_ Calibration and test, electric type, dial type_ Made in KOREA

Ship from South Korea
(0)

[Daekyung Tech] Push-pull gauge calibratorQuote Contact_CS@roasexpo.comThis equipment is used for calibration and testing of electric or dial-type push-pull gauges.CAPACITY :  ( 2 ~ 2,000) NCONTROL : MANUALLOADING : DEAD WEIGHTDEAD WEIGHT : STEEL COATING, F2 GRADEMODE : TENSILE , COMPRESSION..

Quickview

[Daekyung Tech] Hydraulic force calibrator 1 MN_calibration and test, electric force measuring instrument, certificate issuance_ Made in KOREA

Ship from South Korea
(0)

[Daekyung Tech] Hydraulic force calibrator 1 MNQuote Contact_CS@roasexpo.comThis equipment is used for calibration and testing of electric force measuring instruments (load cells), and is used to correct the difference between the high-precision master cell,  and the device to be calibrated or to issue a report by the calibration procedure.It ..

Quickview

[Daekyung Tech] Hydraulic force calibrator 20kN_calibration and test, electric force measuring instrument, certificate issuance_ Made in KOREA

Ship from South Korea
(0)

[Daekyung Tech] Hydraulic force calibrator 20kNQuote Contact_CS@roasexpo.comThis equipment is used for calibration and testing of electric force measuring instruments (load cells), and is used to correct the difference between the high-precision master cell,  and the device to be calibrated or to issue a report by the calibration procedure.It ..

Quickview

[Daekyung Tech] Force cailbrator by dead weight_ Electric force measuring instrument, calibration and test, accurate weight_ Made in KOREA

Ship from South Korea
(0)

[Daekyung Tech] Force cailbrator by dead weightQuote Contact_CS@roasexpo.comIt is a standard calibration device that is used for calibration and testing of electric force measuring instruments (load cells), and is calibrated by accurate weight including local gravitational acceleration.CAPACITY :  200 N ~ 20kNBMC : WITHIN 0.005 %LOADING : AIR ..

Quickview

[Daekyung Tech] Hydraulic force calibrator 50kN_calibration and test, electric force measuring instrument, certificate issuance_ Made in KOREA

Ship from South Korea
(0)

[Daekyung Tech] Hydraulic force calibrator 50kNQuote Contact_CS@roasexpo.comThis equipment is used for calibration and testing of electric force measuring instruments (load cells), and is used to correct the difference between the high-precision master cell,  and the device to be calibrated or to issue a report by the calibration procedure.It ..

Quickview

[Daekyung Tech] Tire durability tester_ abrasion test, rotation test, characteristic measurement_ Made in KOREA

Ship from South Korea
(0)

[Daekyung Tech] Tire durability testerQuote Contact_ CS@roasexpo.comThis is a testing machine designed to test the durability of tires.The wear resistance of tires is tested by creating an environment similar to real driving conditions.It is an equipment that obtains results by measuring the characteristics of a tire by rotating a vehicle tire unde..

Quickview

[Daekyung Tech] Clutch Cover Characteristics Tester_ Release Lever, Clutch Disc, Characteristics and Measurement_ Made in KOREA

Ship from South Korea
(0)

[Daekyung Tech] Clutch Cover Characteristics TesterQuote Contact_ CS@roasexpo.comThis is a dedicated testing machine for clutch cover characteristics for automobiles.Delivered to SECO.It is a device that obtains results by measuring the operation area and characteristics by applying a load to the release lever and clutch disk.CAPACITY : CLAMPING LO..

Quickview

[Daekyung Tech] Ball Joint Gap Tester_ Ball Joint, Characteristic Check, Characteristic Judgment_ Made in KOREA

Ship from South Korea
(0)

[Daekyung Tech] Ball Joint Gap TesterQuote Contact_CS@roasexpo.comAfter checking the gap characteristics of the ball joint,a durability test is performed and the changed characteristics are judged by comparing before and after the test.CAPACITY : ±30 kNRESOLUTION : WITHIN ±0.5%FREQUENCY : 40HzCONTROL : P.C CONTROLSAMPLE : IBJ, OBJMODE : L..

Quickview

[Daekyung Tech] Ball Joint Durability Tester_ Durability Test Equipment_ Specified angle, similar to actual vehicle condition_ Made in KOREA

Ship from South Korea
(0)

[Daekyung Tech] Ball Joint Durability TesterQuote Contact_CS@roasexpo.comDTE-179M- This device is a dust cover durability tester.-It is an equipment for the durability tester of the dust cover, and it uses a computer system to Test samples under environmental conditions using a hydraulic system and chamber controlled by servo valve It was..

Quickview

[Daekyung Tech] Ball Joint Durability Tester_Durability Test Equipment, Specified Angle, Similar Vehicle Conditions_ Made in KOREA

Ship from South Korea
(0)

[Daekyung Tech] Ball Joint Durability TesterQuote Contact_CS@roasexpo.comThis equipment performs long-term durability tests on vehicle ball joints at specified angles at room temperature, high temperature, and low temperature.After the test, the condition of the ball joint and the condition of the rubber cover are analyzed.At this time, the test ca..

Quickview

[Daekyung Tech] Seat frame strength tester_ rigidity test, high-speed test, angle adjustment_ Made in KOREA

Ship from South Korea
(0)

[Daekyung Tech] Seat frame strength testerQuote Contact_ CS@roasexpo.comIt is a testing machine that tests the frame rigidity of automobile seats.Secure the seat frame to the T-slot bed at the back and pull it with a chain to test its strength.In consideration of the load transfer during an automobile accident or sudden braking, the test is carried..

Quickview

[Daekyung Tech] Clutch release lever durability tester_ repeated durability test, operation test, characteristic measurement_ Made in KOREA

Ship from South Korea
(0)

[Daekyung Tech] Clutch release lever durability testerQuote Contact_cs@roasexpo.comIt is a device that obtains results by measuring the operation and characteristics of the release lever by repeating the durability test.It is for clutch tester of large vehicles.It was delivered to the research institute attached to the automobile.CAPACITY : (0 ~ 15..

Quickview

[Daekyung Tech] Handle wear tester_ Leather handle wear test, handle material test, durability test_ Made in KOREA

Ship from South Korea
(0)

[Daekyung Tech] Handle wear testerQuote Contact@CS@roasexpo.comIt is manufactured according to the MS 625-04 standard and is suitable for the abrasion test of leather handles.The cloth is sprayed with a liquid with a composition similar to human sweat and subjected to a specific load and repeated test.The durability of the handle material is tested..

Quickview

[Daekyung Tech] Zeolite Tester_Vehicle Undercarriage, Constant Pressure, Defects_ Made in KOREA

Ship from South Korea
(0)

[Daekyung Tech] Zeolite TesterQuote Contact@CS@roasexpo.comThis equipment is used to test the paintwork of automobiles.When a car runs and collides with small stones, it tests whether the painted surface is damaged by reproducing a situation similar to the actual condition.Small pieces of stone that meet international standards are blown away at hi..

Quickview

[Daekyung Tech] Hose Clamp Tester_ Tension Test, Measuring Equipment, Data Computer Input Method_ Made in KOREA

Ship from South Korea
(0)

[Daekyung Tech] Hose Clamp TesterQuote Contact@CS@roasexpo.comThis equipment tests the strength of hose clamps for vehicles.Measure the force by pulling the hose clamp in three directions, equally spaced at 120 degrees.It is a device for measuring the clamping force of "SUS wire clamp" for automobile hoses,and it is a device to measure the force us..

Quickview

[Daekyung Tech] Bicycle durability tester_ parts tester, rear shock durability, front fork durability test_ Made in KOREA

Ship from South Korea
(0)

[Daekyung Tech] Bicycle durability testerQuote Contact_CS@roasexpo.comThis is a bicycle parts durability tester supplied to Samchully Bicycle.It consists of a device that tests the durability of the front fork and rear shock,which are the main parts of a bicycle, and a device that runs under conditions similar to actual road driving after installin..

Quickview

[Daekyung Tech] Weather strip Endurance tester_ Opening/closing durability test, research and development purpose_ Made in KOREA

Ship from South Korea
(0)

[Daekyung Tech] Weather strip Endurance testerQuote Contact_CS@roasexpo.comIt is an equipment manufactured for the purpose of durability test,research and development by repeatedly opening and closing windows while periodically supplying temperature, humidity, dust and water to the exterior dust strip of the vehicle.LOADING : AIR CYLINDERMODE : CYC..

Quickview

[Daekyung Tech] Seat belt spring tester_forward and reverse rotation durability test, product change test_ Made in KOREA

Ship from South Korea
(0)

[Daekyung Tech] Seat belt spring testerQuote Contact_CS@roasexpo.comThis equipment tests the durability of the spring used in seat belts.Durability is verified by repeatedly performing millions of tests in clockwise and counterclockwise directions.Depending on the number of samples, various sizes can be produced.LOADING : SERVO MOTORMODE : CW &..

Quickview

[Daekyung Tech] Spring steel deformation simulation tester_ characteristic test, deformation, characteristic judgment, automobile seat belt simulation test_ Made in KOREA

Ship from South Korea
(0)

[Daekyung Tech] Spring steel deformation simulation testerQuote Contact_CS@roasexpo.comAfter performing a characteristic test of the spring for automobile seat belt by rotating it forward and backward as much as a prescribed angle,it is checked to determine the deformation or characteristics of the material.CAPACITY : 50 N.mLOADING : SERVO MOTORMOD..

Showing 51 to 75 of 128 (6 Pages)