Category Features

Tools & Hardware

Grid View:
Quickview

[Daekyung Tech] Ozone tester_ Deterioration measurement, ozone investigation, ozone test_ Made in KOREA

Ship from South Korea
(0)

 [Daekyung Tech] Ozone testerQuote inquiry_ CS@roasexpo.comIn order to measure the deterioration of vulcanized rubber due to ozone in the atmosphere,it is designed and manufactured for the purpose of investigating and, testing ozone resistance by exposing a test piece to air containing a low concentration of ozone, which is artificially genera..

Quickview

[Daekyung Tech] Thermal shock tester_ sample deformation, material transfer type, sample stationary type_ Made in KOREA

Ship from South Korea
(0)

[Daekyung Tech] Thermal shock testerQuote Contact_ cs@roasexpo.comThe purpose is to observe the deformation of the product or sample by rapidly changing the temperature,and the composition of the device is classified into a high-temperature and low-temperature preheating room and a room temperature room.TYPE : 3 ZONEINNER SIZE : ORDER MADETEST TE..

Quickview

[Daekyung Tech] Thermal shock tester (2Zone)_ sample deformation, sample transfer type, sample fixing spirit_ Made in KOREA

Ship from South Korea
(0)

[Daekyung Tech] Thermal shock tester (2Zone)Quote Contact_ cs@roasexpo.comThis device is a tester to check whether there is any abnormality in the sample due to sudden temperature change by moving the sample to the hightemperature room and the freezing room within a short time.It is a device designed and manufactured so that temperature changes a..

Quickview

[Daekyung Tech] MIT_ Fluidity measurement, raw material inspection, resin quantity measurement_ Made in KOREA

Ship from South Korea
(0)

[Daekyung Tech] MITQuote Contact_cs @roasexpo.comBy measuring the fluidity in the molten state of the resin, the physical properties (strength, flow chart) and, raw materials of the material are inspected, so defective products can be prevented in advance. is a device for measuring..

Quickview

[Daekyung Tech] sour gasolin cycle tester_ Fuel Pipe Check, Coupler Check, Oil Leak Check_ Made in KOREA

Ship from South Korea
(0)

 [Daekyung Tech] sour gasolin cycle testerQuote Contact_cs @roasexpo.comOxidized gasoline is circulated in the fuel pipe for a certain period of time to check for leaks in the fuel pipe and coupler to determine the product's deformation or pass/fail.CAPACITY : 1.1 Mpa ( 11 kgf / ㎠ )DETECTOR : PRESSURE SENSORMODE : PRESSURE CYCLE, LEAK TES..

Quickview

[Daekyung Tech] Rupture Tester_ Durability Test, Characteristic Test, Product Deformation Judgment_ Made in KOREA

Ship from South Korea
(0)

[Daekyung Tech] Rupture TesterQuote Contact_cs @roasexpo.comDeformation or pass/fail of a product is judged for the purpose of rupturing the metal or non-metal pipe of a vehicle under high pressure or testing the durability or characteristics up to the target pressure.CAPACITY : (10 ~ 200) Mpa (100 ~ 2000 kgf / ㎠ )DETECTOR : HYD. CYLINDERPRESS..

Quickview

[Daekyung Tech] Four-way valve tester_ valve characteristic tester, valve durability tester, automatic leak control_ Made in KOREA

Ship from South Korea
(0)

[Daekyung Tech] Four-way valve testerQuote Contact_cs @roasexpo.comIt automatically controls the valve characteristics and durability leak in the vehicle or home air conditioner to judge product deformation or pass/fail.CAPACITY : 15 Mpa (50 ~ 150 kgf/㎠)DETECTOR : PRESSURE SENSORLOADING : AIR CYLINDERPRESSURE : AIR BOOSTER, CO2 GASCONTROL : P.C CON..

Quickview

[Daekyung Tech] Air leak tester_ air measurement, sample tester, high reproducibility_ Made in KOREA

Ship from South Korea
(0)

 [Daekyung Tech] Air leak testerQuote Contact_cs @roasexpo.comBy measuring a certain amount of air leakage in the sample (product),the pass/fail of the product is judged. It is easy to use and has the advantage of high reproducibility.CAPACITY : 0.5 Mpa (0~5 kgf / ㎠)DETECTOR : PRESSURE SENSORLOADING : AIR CYLINDERPRESSURE : AIRCONTROL : SEMI-A..

Quickview

[Daekyung Tech] Hydraulic repeat tester_ metal pipe tester, crack observation, deformation observation_ Made in KOREA

Ship from South Korea
(0)

[Daekyung Tech] Hydraulic repeat testerQuote Contact_cs @roasexpo.comRepeatedly apply constant water pressure to metal pipes and clamps to observe crabs or deformations.CAPACITY : 5Mpa (50 kgf / ㎠)DETECTOR : PRESSURE SENSORLOADING : HYDRAULIC CULINDERPRESSURE LIQUID : WATERCONTROL : CONTROLSAMPLE : STEEL PIPE, STEEL CLAMPDEPOSIT : WATER OR AIR..

Quickview

[Daekyung Tech] Bursting strength tester_ sample tester, bursting strength measurement, digital type_ Made in KOREA

Ship from South Korea
(0)

[Daekyung Tech] Bursting strength testerQuote Contact_cs @roasexpo.comIt is designed and manufactured in digital type as equipment used to measure the breaking strength of various papers,woven fabrics, films, and corrugated cardboard.Input power: AC 220V, 60HzPower consumption: 0.5kWMaximum capacity: 50kgf/㎠Load display: DigitalDevice Size: (600X50..

Quickview

[Daekyung Tech] Tire Cutter _ Vehicle tires, cut as intended, customized _ Made in KOREA

Ship from South Korea
(0)

[Daekyung Tech] Tire CutterQuote Contact_ cs@roasexpo.comThis equipment cuts vehicle tires according to the user's intention.CAPACITY : Ø 510mm X 4.5 tSPEED : 1,700 rpmCONTROL : MANUALLOADING : MOTOR, 3 HpSAMPLE : TIRE..

Quickview

[Daekyung Tech] Specimen press_ sample inflow, rubber/plastic sample, various standard sample production_ Made in KOREA

Ship from South Korea
(0)

[Daekyung Tech] Specimen pressQuote Contact_ cs@roasexpo.comWe manufacture rubber and plastic samples of various sizes using inflow.CAPACITY : (100, 200, 300, 500) kNTYPE : HYDRAULIC CYLINDERTEMP : RT, 350 ℃MOLD : ORDER MADEPOWER : 220V, 3PH, (2 ~5) kW..

Quickview

[Daekyung Tech] Metal specimen model cutting machine_ metal cutting, diameter 24mm, various metals available_ Made in KOREA

Ship from South Korea
(0)

[Daekyung Tech] Metal specimen model cutting machineQuote Contact_ cs@roasexpo.comThis cutter can cut various metals up to 24mm in diameter.SPIRAL CUTTER : Ø24mmSPEED : (100 ~ 1,800) rpmSAMPLE : AL, STEELJIG : 1 SETPOWER 220V, 1PH, 1kW..

Quickview

[Daekyung Tech] Mounting press_ uniform sample production, double coil, extension of cylinder cap handle_ Made in KOREA

Ship from South Korea
(0)

[Daekyung Tech] Mounting pressQuote Contact_ cs@roasexpo.comThis is a newly built DTM-1 mounting press.The temperature difference between the upper and lower parts of the cylinder has been reduced by doubling the heating coil that applies heat.The result is clean, uniform samples.The handle of the cylinder cap has been greatly expanded and designe..

Quickview

[Daekyung Tech] Medium-sized high-speed cutting machine_ Easy cutting, high-speed cutting, medium-sized commercial cutting_ Made in KOREA

Ship from South Korea
(0)

[Daekyung Tech] Medium-sized high-speed cutting machineQuote Contact_ cs@roasexpo.comIt cuts at high speed for quick and simple cutting of medium-sized commercial plates.Sample size: 85 X 85 mm or Ø 95 mmWheel Speed: 300~3600 RPMWheel size: Ø 250 ~ 305 mmSince the lower part is made of a single cast, there is no case of leakage of lubricant and no..

Quickview

[Daekyung Tech] Medium-to-large high-speed cutting machine_Medium-sized specimen cutting, automatic cutting production, manual handle movable production_ Made in KOREA

Ship from South Korea
(0)

[Daekyung Tech] Medium-to-large high-speed cutting machineQuote Contact_ cs@roasexpo.comIt is manufactured to cut medium-sized specimens precisely and automatically.Cutting size: 160 X 145 or Ø 154Speed ​​(RPM): 1000 ~ 4000 rpmWheel size: Ø 400 mmAuto/Manual : Orderer's specificationIt can be produced with automatic table movement or manual handle..

Quickview

[Daekyung Tech] High-speed precision cutting machine_ Medium-sized specimen, diamond-on-wheel, high-speed automatic cutting_ Made in KOREA

Ship from South Korea
(0)

[Daekyung Tech] High-speed precision cutting machineQuote Contact_ cs@roasexpo.comHigh-speed automatic cutting with a diamond wheel so that medium-sized specimens can be cut precisely.CAPACITY : (60 X 60) mm , Ø 60 mmSPEED : (300 ~ 4,000) rpmWHEEL : DIAMOND WHEELWHEEL DAI : Ø(75 ~ 200) mmLUBRICATLON : PUMPINGCUTTING : MOTOREZEDTYP : AUTOMATIC..

Quickview

[Daekyung Tech] Low speed precision cutting machine_ diamond wheel, low speed cutting, small specimen cutting_ Made in KOREA

Ship from South Korea
(0)

[Daekyung Tech] Low speed precision cutting machineQuote Contact_ cs@roasexpo.comIt is cut at low speed with a diamond wheel so that small specimens can be cut precisely.CAPACITY : (25 X 25) mm, Ø30 mmSPEED : (30 ~ 500) prmWHEEL : DIAMOND WHEELWHEEL DAI : Ø(75 ~ 125) mmLUBRICATION : SELF WETCUTTING : USING DEAD WEIGHTTYPE : MANUALPOWER :..

Quickview

[Daekyung Tech] Notching molding machine_ small processing machine, V-notch production, plastic impact specimen_ Made in KOREA

Ship from South Korea
(0)

[Daekyung Tech] Notching molding machineQuote Contact_ cs@roasexpo.comA compact machine capable of making V-notches for plastic impact specimens.V NOTCH CUTTER : Ø75mmSPEED : (40 ~ 80) rpmSAMPLE : PLASTIC IMPACT SAMPLEMOVING : X-Y TABLEPOWER : 220V, 1PH, 1kW..

Quickview

[Daekyung Tech] Specimen cutting machine_ sample production, cutter option, pneumatic use_ Made in KOREA

Ship from South Korea
(0)

 [Daekyung Tech] Specimen cutting machineQuote Contact_ cs@roasexpo.comPaper and rubber samples are produced using pneumatic pressure.This is a molding machine that cuts thin samples such as rubber, plastic, paper,and corrugated cardboard in accordance with ASTM, KS, and ISO standards.It uses pneumatics and does not require a separate power s..

Quickview

[Dekyung Tech] Paper specimen cutting machine_ for accreditation tests, link rush compression, specimen cutting_ Made in KOREA

Ship from South Korea
(0)

 [Dekyung Tech] Paper specimen cutting machineQuote Contact_ cs@roasexpo.comSpecimen maker V capable of cutting specimens for tensile testing and link rush compression..

Quickview

[Daekyung Tech] Cord creep tester_ tire cord, belt type, creep test_ Made in KOREA

Ship from South Korea
(0)

[Daekyung Tech] Cord creep testerQuote Contact_cs@roasexpo.comIt is an equipment manufactured for the purpose of performing a creep test by inserting a tire cord in the form of a rubber and molded belt for a specified time with a constant load and temperature...

Quickview

[Daekyung Tech] Automatic tension EPI device_ tire cord, automatic method, constant tension_ Made in KOREA

Ship from South Korea
(0)

[Daekyung Tech] Automatic tension EPI deviceQuote Contact_cs@roasexpo.comThis equipment is designed to automatically wind the tire cord with a certain tension...

Quickview

[Daekyung Tech] Cord dryer_ Reinforcing material, tire cord, heat treatment/ chemical treatment_ Made in KOREA

Ship from South Korea
(0)

[Daekyung Tech] Cord dryerQuote Contact_cs@roasexpo.comIt is an equipment manufactured for the purpose of research/development by heat-treating and, chemically treating tire cords, which are reinforcement materials for automobile tires, before mass production.CAPACITY : 300N X 7 mACCURACY : WITHIN ± 0.5 %HEATING : (RT ~ 300) ℃SPEED : 3 m/..

Quickview

[Daekyung Tech] Screen door tester_ sample crack, failure test, pressure test_ Made in KOREA

Ship from South Korea
(0)

[Daekyung Tech] Screen door testerQuote Contact_cs@roasexpo.comIt is designed and manufactured as a device that tests whether a sample is cracked or broken by reproducing the pressure applied to the screen door,a safety facility at a railway station, under similar conditions.CAPACITY : 400mmAgDETECTOR : LOAD CELL, LVD SENSORLOADING : HYDRAULIC CYLI..

Showing 26 to 50 of 151 (7 Pages)