CTNG Light transmission type soot meter CTN-2200 full set accessories wired remote control, printer, standard filter, RPM meter_Made in KOREA

USD $3,391.30 USD $4,260.87

0 reviews

Brand:
ctng
Product Code:
CTN-2200
Availability:
In Stock

Diesel vehicle smoke meter: This device measures the soot concentration of diesel (diesel) engines, and uses a partial flow sampling method light transmission method.
CTN-2200: This is the product model name of CTN, which enables continuous measurement in real time and helps to measure the concentration of soot in automobiles.
Smoke meter full set accessories: Wired remote control, printer, standard filter, RPM meter, etc. are included to enhance the convenience of users.

Light-transmitting soot meter for diesel vehicles

Full set of products
Soot meter + wired remote control + printer + standard filter + RPM meter

It is a device that measures the concentration of soot generated from diesel (diesel) engines by the partial flow collection method light transmission method, and it is a device that can be continuously measured in real time and helps to measure the concentration of soot in automobiles.

Light-transmitting measurement method of partial flow sampling method

4-digit license plate number printable

Automatic adjustment of LED light value (soot value accurate)

Dual-fan ON/OFF function (ON only when used)

Fast response times and accurate measurements

Easy operation principle makes it easy for anyone to use

Full set accessories

Wired remote control connection enables remote control operation

The result can be printed by mounting the printer

Vehicle RPM and OIL temperature can be measured

Standard Filters

Wired remote control
printer
Standard Filters
RPM Meter

National Institute of Environmental Sciences : Type Approval No. OED 2023-7
KC Certification Registration No. R-R-CtA-CTN-2200

Individual purchase

Customers can purchase the soot meter or accessories individually rather than as a full set.
If you click on the name of the product you want, you can go to the detailed page of the product. You can check the price, specifications, features, and usage of the product, and you can add it to your cart or order it right away.

B2B Corporate Member

As a corporate member, if you would like to purchase a smoke meter or accessories, please contact us by email. We will be happy to advise you quickly and kindly.
You can do this by emailing cs@roaexpo.com clicking on Contact Us.

Product appearance

Front

Rear section

1 display control panel, 2 printers

3,5 intake fan, 4 moving handle, 6 extraction gas inlet

Side parts

1 RPM connection, 2 remote control connection, 3 oil temperature connection, 4 RS232 connection, 5 power switch, 6 fuse, 7 power cord connection

A full set of products

1 main unit
Basic accessories
1 probe, 1 probe hose, 1 power cord, 2 fuses, 1 user manual, 1 communication cable, 1 PC program
Full set accessories
1 print, 1 remote control, 1 standard filter, 1 RPM

Installing the product and operating the remote control

Insert the probe hose into the gas inlet on the back of the analyzer, check whether the tightening is correct, and connect the remote control, RPM / oil temperature, and PC communication cable according to the options.
And connect the power cable on the side, and then turn it on.
After warming up, insert the end of the measuring probe into the exhaust port to be measured and start the measurement.

The remote control plays the same role as the display part of the main unit and the function KEY.
Press the ON/OFF KEY on the remote control for 3 seconds.

Precautions

Safety precautions

This is to protect the safety of users and prevent unforeseen dangers or damages. Please be sure to read it carefully and use the product correctly

General Precautions

(1) Please read the instruction manual thoroughly and East Sea small operation of the measuring instrument.
(2) Please perform a brief inspection before measuring.
(3) Stop using it immediately if any unusual problem occurs, and contact the manufacturer for inspection.
(4) Please calibrate according to the calibration cycle.

Installation location and conditions

(1) Please install it in a place where there is no direct sunlight, rain or wind, or sudden changes in temperature.
(2) Install it in a place where it is not directly exposed to the exhaust gas of the car.
(3) Please install it away from devices with high voltage or high current.
(4) Please install it in a well-ventilated place.

Notes

(1) Some of the contents of the user manual may differ depending on the supply specifications.
(2) The pictures and descriptions used in the user manual may differ from the actual product.
(3) The contents of the user manual are subject to change without notice in order to improve quality.

Download the manual

Customers can download the product guide manual in English or Korean .
If you click the button in the desired language, the manual will be downloaded automatically.
For example, if you want to get the English manual, you can click the [English Manual] button. If you open the downloaded manual, you can find detailed information about the installation, use, maintenance and care of the product, safety matters, soot measurement principles, etc.

Specifications

Item Contents
Model/Product NameCTN-2200 / Light-transmitting soot meter
MetricsSoot concentration, light absorption coefficient, RPM(option), oil temperature °C(option)
Measurement methodPartial flow sampling method light transmission type
UseFielder0.5 seconds Besel low pass digital filter
Light source/detectorGreen LED (565nm) / Photodiode
Measuring rangeFumesOptical absorption system.RPMOil Temperature
0.0 ~ 100 %0.00 ~ 21.42 m-10 ~ 8,000 rpm0 ~ 120 ℃
Display part4-digit 7-segments LED4-digit 7-segments LED4-digit 7-segments LED4-digit 7-segments LED
Cell length/inner diameterLength: 215mm / Inner Diameter: 21mm
Cell TemperatureApprox. 70 ~ 80°C constant temperature
Repeatability/AccuracyWithin 1% / Within ±1% (RPM: ±80rpm)
Response Time0.5 seconds (90%)
Soot measurement speed60 times per second
Soot concentration display4 times per second
Data transmission (communication)RS232C, 10 times per second
Warm-up timeApprox. 5 minutes
Operating Temperature-10 ~ 40℃
Power Consumption/Power ConsumptionAC 110V~220V, 50Hz~60Hz/About 65W
Size/Weight425 (W) x 190 (D) x 385 (H) mm / approx. 5 kg (body)
Probe hose length1.5m
Basic accessoriesProbes and hoses, power cords, communication cables, PC programs, user manuals, fuses
Full set configurationSmoke meter, printer, remote control, standard filter, RPM, oil temperature

There are no reviews for this product.